Sinotruk HOWO emergency rescue fire truck
(Vehicle model: CLW5140TXFJY80/HW emergency rescue fire truck )
(Chassis model: ZZ5207TXFV471GF5 )
Technical Specifications
Model: ZZ5207TXFV471GF5
Drive type: 4×2
Wheelbase: 4700mm
Maximum speed: 95km/h
Engine model: MC07.35-60 (National VI) (diesel)
Power: 257kW
Structure: Flat head, original double row seat four door crew cab.
Seat configuration: 2 people in the front row and 4 people in the back row . Guardrails and handrails are installed in front of the seats. Firefighters are rushing to put out the fire.
During the rescue, they quickly put on the air breathing apparatus and after arriving at the fire scene, they quickly engaged in fire-fighting and rescue operations.
Cab structure: Install a hydraulic tipping mechanism to accommodate tipping.
Cab equipment: In addition to the original equipment, power take-off control switch, 100W siren, warning light switch are installed
Strobe light switch, etc.
Outside the cab: A long row of warning lights is installed on the front of the cab roof.
Main Materials:
The skeleton and skin are made of high-quality carbon steel; the internal equipment frame is made of aluminum alloy profiles; the interior trim panel is an oxidized 1.5mm aluminum patterned plate.
Basic structure:
1. It is an integral structure, with the front, middle and rear parts being equipment boxes.
2. The equipment box is equipped with a locked rolling door.
3. The space can be adjusted arbitrarily, and the equipment box is equipped with drainage holes.
4. The equipment box is reliable, beautiful, and can be adjusted at will. The equipment box has six large curtain doors to ensure full utilization of the space.
5. There is a lighting lamp inside the box to meet the lighting needs of night fire fighting operations.
6. An aluminum alloy ladder for getting on and off the vehicle is installed at the rear of the equipment box.
Aluminum alloy rolling door:
1. All equipment compartments are equipped with rolling shutter doors with locks. The handles and lock pins are sturdy and durable, and will not deform. The sealing performance has been tested with water spray to ensure that there is no leakage.
2. The sliding tracks on both sides of the rolling door are fixed with rivets to prevent them from falling off.
3. Each equipment compartment is equipped with lighting, which is controlled by the opening and closing of the rolling door.
4. There are three aluminum alloy curtain doors on the left and right, which are safe, reliable, beautiful and practical.
1. Lifting lighting system:
Model: YZH6-4.83CFA (Shanghai Bocan)
Generator: SHT11500
Power: 10KVA
Frequency: 50HZ
Voltage: 380V/220V
Main lighting power: 1500W×4 ( halogen lamp )
Lifting rod: Aluminum alloy
Type: Pneumatic
Maximum height from ground: 8m
Gas supply pressure: ≥0.3MPa
Lifting speed: ≤8 seconds
Lifting weight: 45kg
Installation location: located at the front of the box
Head: Aluminum alloy
Pitch: ≥±90°
Left and right rotation: ±155°
Voltage: 220V/24V
Distribution box: It is equipped with function control keys, instruments, and various operations are all concentrated on the control box, which can accurately and quickly control all operating actions and is equipped with wireless buttons.
2. Traction winch system:
Manufacturer: American Champion
Model: N16800XF (DC24V)
Drive type: Electric
Maximum pulling force: 75KN
Maximum traction speed: 4.2m/min
Wire rope diameter: 13.2mm
Wire rope length: 38m
Installation location: located at the front of the vehicle
3. Folding vehicle-mounted crane system:
Manufacturer: Xuzhou Tengchang
Model: SQ5ZA2
Drive type: Hydraulic
Maximum lifting weight: 5000Kg
Maximum amplitude: 8m
Rotation angle: -90°~+90°
Installation location: at the rear of the vehicle
4. Additional electrical system:
1) There is a long row of red warning lights on the front of the cab.
2) The vehicle is equipped with 3 LED flashing lights and lighting lamps (combined type) on each side, safety sign lights and side return reflectors (combined type) installed below, front and rear clearance lights, and lighting lamps in the passenger compartment and equipment box, which comply with the provisions of GB4785.
3) The power of the siren is 100W; the siren, warning light and strobe light circuits are independent additional circuits, and the control devices are installed in the cab.
4) A 360-degree rotating lighting lamp is installed at the rear of the roof.
5. Manufacturing technology and process requirements:
1) The whole vehicle is painted with high-quality paint, the upper guard plate and wheel cover are white, and the rest is fire red.
2) All structural parts are welded with carbon dioxide protection, and are firm, flat, smooth, and free of voids. Rust and corrosion prevention should comply with relevant regulations.
3) The performance of the whole vehicle complies with the requirements of GB7956 "Fire performance requirements and test methods for fire trucks".
4) The electrical system complies with the relevant provisions of the national power generation and lighting standards BG5493, BG5476, and BG5174.
5) The fire truck markings shall comply with GB7258-2004 "Technical Safety Requirements for Motor Vehicles".
6) The external lighting and signal devices of fire trucks shall comply with GB4785-1998 "Regulations on the Installation of External Lighting and Signal Devices of Motor Vehicles and Trailers".
7) The rear lower protection requirements of fire trucks must comply with GB11567.1-2001 "Requirements for rear lower protection of motor vehicles and trailers".
8) The appearance of the vehicle shall comply with the provisions of GA39. The overall dimensions, axle load and mass limit shall comply with the relevant provisions of GB1589-2004.
9) All operating switches, instruments, equipment and vehicles have nameplates that comply with the regulations. Reflective warning films are pasted on both sides of the rear of the vehicle for nighttime driving warnings.
6. Equipment layout requirements and configuration standards:
1) Quickly access any equipment by standing on the ground or on the pedals.
2) The equipment is compactly arranged, firmly clamped, and easy to use.
7. Documents accompanying the vehicle:
1) Fire truck instruction manual 6) Fire truck tracking service card
2) Fire truck certificate 7) Chassis instruction manual
3) Chassis certificate 8) Chassis quality warranty card
4) Chassis maintenance booklet 9) Vehicle tool list
5) Traction and crane instruction manual 10) Fire truck handover
Equipment equipped with table
| order number |
name |
unit |
quantity |
remarks |
| 1 |
fire hose |
tray |
10 |
- Φ 65-20 6 disc
13- Φ 80-20 4 disc |
| 2 |
water absorption tube |
rice |
8 |
|
| 3 |
water-strainer |
piece |
1 |
|
| 4 |
Water collector |
piece |
1 |
|
| 5 |
Three points of water |
piece |
1 |
|
| 6 |
Water suction tube wrench |
individual |
2 |
|
| 7 |
Ground fire hydrant wrench |
piece |
1 |
|
| 8 |
Underground fire hydrant wrench |
piece |
1 |
|
| 9 |
The belt bridge |
individual |
2 |
|
| 10 |
Water belt wrapped cloth |
piece |
4 |
|
| 11 |
Water belt hook |
piece |
4 |
|
| 12 |
a firemans axe |
piece |
1 |
|
| 13 |
Iron desperate |
piece |
1 |
|
| 14 |
spade |
piece |
1 |
|
| 15 |
pick hammer |
piece |
1 |
|
| 16 |
Waist axe |
piece |
1 |
|
| 17 |
Different diameter interface |
single |
2 |
Bubuckle Φ 65 variable Φ 80 |
| 18 |
Heterotypic different diameter interface |
single |
1 |
150/100 |
| 19 |
Switch DC water gun |
branch |
1 |
|
| 20 |
Flower water gun |
branch |
1 |
|
| 21 |
Foam spray gun |
branch |
1 |
PQ8 |
| 22 |
dry-chemical fire extinguisher |
With |
1 |
3 kg, ABC dry powder |
1:What payment methods do you support? - We support T/T and LC and other ways you need.
2:What is your minimum order quantity? - One unit.
3. How about the delivery time? - Generally it will takes 10 to 30 days after receiving your deposit. The sactual date will be depended on your order and item. We will contact you if we confirm the delivery date. And we will track the goods all the time until the goods reach to the destination.
4.How can I confirm whether your products will meet my needs? -You can tell us your needs such as size, material, volume, height and other information, our professional sales will provide solutions.
5. How do you pack the products? - Standard shipping packaging.
6. How about the price? - To provide the top quality product with competitive price is our mission all the time. We want a long-term business relatonship with our customers rather than cooperate for once.
7. How can I trust you? - We have 15 years of experience in the trailer manufacturing field; and we have our own factory. - We have supplied for many famous company at home and abroad; - We want to provide great service for you rather than just provide a price and product for you; - To meet you is the first step, then we would like to make friends and maintain the business relationship with you all the time.
Audited Supplier 
){kind=link}