Sinotruk 4X2 Sweeper Truck Road Sweeper Truck High Strength Road Sweeper Sweeper Truck High Strength Sinotruk Sweeper Truck for Urban Street Maintenance

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: 12 Months
• Model NO.: CLW
• Certification: ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
• Transmission Type: Manual
• Emission Standard: Euro 4
• Fuel: Diesel
• Payload: 18t
• Use: Burnishing
• Cleaning Process: Acid Claening\Pickling
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 18T
• Trademark: Dongfeng
• Origin: China
• HS Code: 0601101000
• Production Capacity: 1000

Product Description

Cheng Liwei brand CLW5182TXSZ6 type 18T cleaning car

[Vehicle technical parameters]
Product trademark	Cheng Liwei card	Announcement batch	377
product name	Wash the car	product model	CLW5182TXSZ6
gross mass (Kg)	18000	Tank volume (m3)
Rated load mass (Kg)	6250,6185	outline dimension (mm)	8750×2530×3150
curb weight (Kg)	11620	Goods Chamber Size (mm)	××
Rated passenger capacity (person)		Quasi-trailer total mass (Kg)
Number of passengers (person)	2,3	Maximum saddle load mass (Kg)
Approach angle / departure angle of (°)	17/13	Front suspension / rear suspension (mm)	1550/2100
axle weight (Kg)	6500/11500	Top vehicle speed (Km/h)	89,102,79
remarks	1. The special device of the vehicle consists of a cleaning device, sucking-off plant, The combination of dustbin and flushing system, Mainly used for road cleaning operations; 2. Side protection is replaced by a special device sweep brush, The rear lower protection is welded with the frame, Material is Q235A, Size of the rear protection section (mm): 23060, Height of the rear protection from the ground (mm): 490; 3.ABS model: 446 004 6300; ABS manufacturer: ZF Commercial Vehicle System (Qingdao) Co., Ltd.; 4. Only choose the wheelbase: 5,100 mm; 5. Select the speed limit device, Speed limit device speed limit (km/h): 79 or 89.6. optional cab appearance. Select the cab along with the chassis.
[Chassis technical parameters]
Chassis model	ZZ1187K511JF1	Chassis name	truck chassis
brand name	Howell card	manufacturing enterprise	Sinotruk Group Jining Commercial Vehicle Co., LTD
number of axles	2	Number of tires	6
wheel base (mm)	4500,4700,5100,5300,5600,5800,6000,3800,4200
tyre size	10.00R20 18PR,11R22.5 18PR,11.00R20 18PR,12R22.5 18PR,295/80R22.5 18PR,295/60R22.5 18PR,305/60R22.5 18PR,315/60R22.5 18PR,275/80R22.5 18PR
Number of steel plate spring sheets	3/9+6,4/-,4/5,4/9+6,9/9+6,-/2+-,2/2+-,3/2+-,4/2+-,7/7+3,3/7+3,2/1+-,3/1+-,4/1+-	front gauge (mm)	1956,2022,2058,1996
Fuel types	diesel oil	rear track (mm)	1800,1830,1860
Emission basis standard	The GB17691-2018 countries
engine type	Engine production enterprise	displacement (ml)	power (Kw)
WP6H270E61 WP6H245E61 WP4.6NQ220E61 WP7.300E61 WP7H220E62 WP7H245E62 WP7H270E62 WP7H300E62 WP7H320E62 WP4.6NQ220E62 WP4.6NQ240E62	Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD Weichai Power Co., LTD	6220 6220 4580 7470 6800 6800 6800 6800 6800 4580 4580	199 180 162 220 162 180 199 221 235 162 177

Overview of Dongfeng Tianjin car (5000 wheelbase)

• The washing car adopts dongfeng Tianjin DFH1180EX8 type six second class automobile chassis modification, with auxiliary engine, fan, high pressure water pump, water box, dustbin, left and right sweep, wide suction nozzle with water spray rod, low pressure washing system, low pressure washing system, sweep plate dust system, hydraulic system, special device electronic control system and subframe modification.
• The secondary engine drive fan and high pressure water pump, the secondary engine uses Dongfeng Cummins six-cylinder 170 horsepower diesel engine. The fan uses 8.0 high pressure centrifugal fan, high efficiency, high air volume, the highest air volume of 23500 m3/h. The high pressure pump adopts imported plunger pump with suitable flow and high pressure and maximum pressure up to 10MPa.
• The clear water box makes full use of the vehicle space, with a large volume of 9m3. The dustbin is made of single layer 304 stainless steel structure, with high pressure self-cleaning device. The self-cleaning device can help unload the bin and clean the inside of the dustbin.
• Left and right sweep for single sweep disk, reduce the number of brush and brush consumption, can reduce the cost of use. Left and right vertical sweep is controlled separately, which can realize different operation modes such as left sweep, right sweep and full sweep. The width of the wide suction nozzle reaches 2418mm, ensuring that the total operation width is greater than 3.5mm. The four highly adjustable nozzle wheels can adjust and ensure the reasonable gap between the nozzle and the road surface in many aspects. The suction nozzle has built-in high pressure water spray rod, arranging the high pressure washing nozzle as much as possible, not only the cleaning effect is good, but also can minimize the secondary pollution caused by the high pressure water airflow flushing the dirt.
• The left and right water spray rod is installed on the suction cup, with the suction cup lifting, the structure is simple and compact, to ensure that the height of the water spray rod is fixed, to achieve the best cleaning effect. Open hydraulic system drives the left and right vertical sweep lift, left and right sweep and circling, suction mouth lifting, dustbin back door opening and closing, dustbin roll over reset and other mechanical actions.
• The chassis gearbox side force collector drives the low-pressure water pump to realize the low-pressure flushing function of the sprinkler, and start and stop operation.
•  Type washing car has road cleaning, road cleaning, curb cleaning, curb and curb facade washing, low pressure washing, spray dust removal and other functions. There are "full wash sweep", "left wash sweep", "right wash sweep", "full sweep", "left sweep", "right sweep" and other operation modes can be selected. Select the "full washing and sweeping" mode to clean the square and road surface, high cleaning efficiency and good effect, the washing rate of more than 90%. Select "Left Wash" or "Right Wash" mode to clean the pavement and curb, and wash the curb facade. When road cleaning or road cleaning operation is required, choose road cleaning mode. When spray dust removal is needed, the spray device can be opened to conduct spray dust removal operation. Low-pressure flushing operations can be performed on the road surface like a sprinkler.

 

Dedicated performance parameters	Dumster Volume (m3)			7 (made of stainless steel)
	Clear water tank volume (m3)			9 (made of stainless steel)
	Cleaning Width (mm)			2800-3200
	Cleaning operation speed (km/h)			3-15
	Cleaning operation speed (km/h)			15-20
	Maximum cleaning capacity (m2 / h)			48000
	Suction ability	Density (g/cm3)		2.0
		Cleaning operation time		2-4 Hours
		Suction particle size (mm)		≥100
	Garbage box dump Angle			≥45°
	Cleaning efficiency			≥96%
	Operation noise (db)			<88 Compliance with the GB7258 requirements
Driving performance parameters	Drive type			42 Rear axle drive
	Suspension type			plate spring
	Number of leaf springs (front / back)			8/10+7
	Brake type			Double-circuit air pressure brake, drum type
	Brake distance (full load of 30 km/h)			≤10m
	Top vehicle speed (km/h)			99
	Minimum turning radius (m)			8
	maximum gradability			≥30%
	Clutch system			Single-piece dry diaphragm spring clutch, hydraulic control
	Transmission system			Mechanical 5-gear transmission, with synchronizer, manual
	Engine fuel consumption			Driving force (L / 100km)	school assignment (L/h)	Operation (L / 10000m2)
				≤14	≤8	≤5
Dust system	Water spray form			Low pressure fog
	Main components			Inlet high pressure pump, water filter, pipeline, stainless steel nozzle, high pressure nozzle, etc
	High pressure pump			German Pinfu
	installation site		Clean dust	Left and right front sweep plate
			Dust absorption and dust removal	Inside the suction outlet of the suction cup
	Control type			Electronic control, one-click operation

 

hydraulic pressure system	type		Open mode, electric motor control and centralized manipulation
	major component		Gear pump, cycloid motor, hydraulic cylinder, solenoid valve, integrated block, high-pressure pump, etc
	Wiring motor		Sanyo motor
	geared oil pump		Long source machinery
	hydraulic jack		Heidrevo oil cylinder
	Hydraulic cylinder seal		Taiwan dingji
	Hydraulic tubing		Guangzhou tianhe
	Electromagnetic valve group		Hyderrevo
	Earthquake-proof pressure gauge		Germany IMT
	Return oil filter		Sofima, Shanghai
	System overflow pressure	Mpa	10-12
	Hydraulic tank volume	L	≥60
Electrical system	system composition		It is composed of chassis vehicle circuit and auxiliary engine electrical part and operation control circuit of special working device.
	Chassis vehicle system voltage (V)		24
	Operating Device System Voltage (V)		12
	Electric control box panel composition		Auxiliary engine tachometer, auxiliary engine water temperature meter, oil temperature alarm device, various operation and control switches
	control switch		siemens
	Programmable logic controller		Omron, Japan
	circuit breaker		Germany Haig
	Battery model		12V-70A.H (2 only in parallel)
Fan system	type		Special high-pressure centrifugal fan
	brand		Luoyang north slope fan
	Rated working speed	r/min	2700
	Transmission type		Auxiliary engine, clutch, with tooth high temperature resistant A belt drive (4 roots)
	Fan belt		Zhejiang sanlishi
	automatic clutch		Centrifugal, imported material, warranty for one year, service life up to 20,000 working hours
	Air volume (m3/h)		5000 ~ 7800

 

Cleaning system	type		Between the front and rear axles of the chassis, a lifting and extending vertical sweep plate of the frame is arranged on both sides of the frame. The sweep hover is driven by the hydraulic motor, and the speed is adjustable.
	Main components		Sweep disk support, sweep disk, oil cylinder, oil pipe, connecting rod, adjusting rod, hydraulic motor, etc
	Scan to open the diameter	mm	φ800-900
	Disk motor speed	r/min	140
	The quantity of sweep dish		2
	Number of a single sweep disk with a brush		22
	Slash tilt Angle adjustment	The front sweep dish	5°~15° forward 5°~10° forward
		After sweeping the plate	5°~10° 5°~10°
Mouth suction device	type		The suction nozzle is suspended between the rear wheels of the chassis car, composed of suction nozzle, roller, straw, the nozzle body can be moved, the suction nozzle lift is controlled by the oil cylinder double suction nozzle wide nozzle, built-in long row spray rod with high pressure nozzle (nozzle number 8), suction nozzle body and the road surface. Hydraulic drive electrical automatic control suction nozzle lifting, spring floating suspension.
	The diameter of the straw	mm	Φ180
	Suckling brand		Germany NORRES
	Walking wheel bearing		Swedish SKF (Skffer)
	Walking wheel wear-resistant outer ring		The Swedish Stellana
	Working status at the mouth ground clearance (mm)		5~8
	Sucstraw wind speed (m/s)		50 ~ 65
	Suction mouth (mmH2O)		380
Other configuration	alarm system		Reversing voice alarm system
	Secondary operating system		Tail live control operating system, control the large box lift and rear door switch, to avoid the user in the cab operation due to can to observe the rear situation safety accidents.
	Manual pump emergency lifting system		If the hydraulic system cannot be used due to the secondary engine fault, the sweep brush, suction cup and large box can not be lifted, so the manual pump emergency lifting system can be used to operate.

 

1:What payment methods do you support? - We support T/T and LC and other ways you need.
2:What is your minimum order quantity? - One unit.
3. How about the delivery time? - Generally it will takes 10 to 30 days after receiving your deposit. The sactual date will be depended on your order and item. We will contact you if we confirm the delivery date. And we will track the goods all the time until the goods reach to the destination.
4.How can I confirm whether your products will meet my needs? -You can tell us your needs such as size, material, volume, height and other information, our professional sales will provide solutions.
5. How do you pack the products? - Standard shipping packaging.
6. How about the price? - To provide the top quality product with competitive price is our mission all the time. We want a long-term business relatonship with our customers rather than cooperate for once.
7. How can I trust you? - We have 15 years of experience in the trailer manufacturing field; and we have our own factory. - We have supplied for many famous company at home and abroad; - We want to provide great service for you rather than just provide a price and product for you; - To meet you is the first step, then we would like to make friends and maintain the business relationship with you all the time.