City Street Compression Garbage Truck, Community Property Compression Garbage Truck, School Campus Compression Garbage Truck, Hospital Dedicated Compression Gar

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: a Years
• Model NO.: CLW51457TYDFW5
• Certification: ISO9000
• Volume: 10001-15000L
• Emission Standard: Euro 4
• Transmission Type: Automatic
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: Jiefang
• Models: Build
• Usage: Dump
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 15 cubic meters
• Trademark: CLW
• Origin: China
• HS Code: 4001210000
• Production Capacity: 1000

Product Description

                            Futian 5 squaresParameters of
Introduction of the car model
The compressed garbage truck is composed of a sealed garbage box, a hydraulic system and an operating system. The whole vehicle is fully sealed. The sewage in the process of self-compression, self-dumping and compression all enters the sewage compartment, which completely solves the problem of garbage transportation.Secondary pollutionThe problem avoids inconvenience to people. The key parts are imported parts, which have the advantages of high pressure, good sealing, convenient operation, safety and so on. It can be equipped with a variety of rear-hanging bucket flipping mechanism or garbage bucket flipping mechanism.
  Main technical parameters:

[Technical parameters of the whole vehicle]
Product name	Compressed garbage truck
Total mass(Kg)	4495	The volume of the box(M3)	5
Rated load mass(Kg)	500	External size(Mm)	5.995X2050X2400,2300
Quality of preparation(Kg)	3865	The number of passengers in the cab(People)	2
Approach angle/Departure angle (°)	12/20	Front suspension/Rear suspension (mm)	1,190/1760
Axis load(Kg)	1650/2845.	.The maximum speed(Km/h)	110
[Chassis technologyParameters]
Chassis model	BJ1045V9JB5-54.	Name of the chassis	Cargo vehicle chassis
Trademark name	Futian brand	Manufacturing enterprise	BAIC Foton Automobile Co., Ltd.
Number of axes	2	Number of tires	6
Wheelbase (mm)	2850
Tire specifications	6.50R16LT 10PR,195/75R16 10PR
The number of steel plate springs	3/5.	Front wheelbase(Mm)	1369,1387
Types of fuel	Diesel oil	Rear wheelbase(Mm)	.1242,1342
Emissions based on standards	GB17691-2018 Country VI
Engine model	Engine manufacturers	Discharge(Ml)	Power(Kw)
Q23-115C60.	Anhui Quanchai Power Co., Ltd.	2300	85

Chassis configuration:

Single-row cab, 5-speed gearbox, full fuel 115 horsepower engine, 6.50R16 steel wire tires, 3T rear axle, ABS, power steering, clutch assistance, TBOX, cut-off air brake. National joint insurance.

Top-loading configuration table:

Order	Name	Specifications and models
1	Chassis name/model	FukudaSeries
2	Wheelbase (mm)	2850
Three	The volume of the box is m3	5.(Ensure that the standard 240L trash can can be loaded80Barrel)
4	Box thickness mm	Wugang Q345 low-alloy manganese steel (four sides and four bottoms) flipping mechanism scraper, arc bottom plate, slide adopts Q710 high-strength plate
5	Sewage tank	There is a sewage sink on the front of the large box, and an integrated sewage tank at the bottom of the filler.
6	Box shape	Arc, the side plate is the whole plate for one-time molding, no welding
7	.Hydraulic cylinder	To be determined
8	Oil pump	To be determined
9	Multi-way valve	To be determined
Ten	Hydraulic oil pipe	Bonway hydraulic oil pipe (high-density double-layer 24Mpa)
11	System rated pressure	18 MPa
12	Compression ratio	≥0.85
13	.Consolidation method	Two-way peristaltic compression
14	Control system	German Siemens PLC and German photoelectric sensors
15	Loading single cycle time	≤24 s
16	Time to dump garbage	≤35 s
17	Control method	All-in-one independent operation of the handsplet (standard remote control)
18	Key component structure	.Reinforced with cast steel parts
19	Shovel and skateboard slider	Highly wear-resistant nylon
20	The design of the whole vehicle	Use SW three-dimensional software to simulate
21	Back-hanging bucket method	Standard configuration: rear-turning barrel type (can hang the national standard 240 plastic barrel or iron barrel or triangular bucket)
22	Body color/text	Body color and text painting can be customized according to customer requirements.
22	Attachment	.Profile light, side light, work light

Product highlights:

1. Larger loading capacity: the same volume of the box increases by 5% per square capacity compared with the previous generation (more than 7 barrels of 240L trash cans).
2. Fault-prone position: The force position of the scraper skateboard is generally prone to deformation, resulting in unstable work. The new generation of products developed by our company has innovated in terms of materials and design, making the performance of the whole vehicle more stable and improving the service life.
3. Working time: The loading time of the new generation of compressed garbage trucks produced by our company is within 25 seconds in the idle state, and the loading time is the longest time used by the vehicle, so it is economical fuel, reduces costs, and improves work efficiency.
4. Wear parts: The scraper is the largest force on the vehicle, and the slide is the most worn. Our company's slide adopts a high-strength Q710 of more than 8mm. The middle of the scraper is strengthened separately, which has greater bearing capacity and stronger wear resistance, greatly increasing the service life.
5. Oil pump: Oil pump is the main component of the compression vehicle. Our company's new generation oil pump is customized for oil pump factory, with stable performance and extremely low failure rate.

6. Noise: The new generation of compression vehicles has added a photoelectric induction device, which can control the travel distance of each action, reduce the metal sound generated during collision and scraping, and effectively improve noise pollution.

Precautions:

1. When operating, irrelevant personnel should be avoided from approaching the vehicle, especially the rear of the vehicle.

 
Two.,Garbage should be evenly put into the filler. Do not concentrate on one side, so that the center of gravity of the vehicle is shifted, or at the mouth of the filler.
If the garbage heap is too high, it will affect the pressure filling of garbage and the uniform distribution of garbage in the garbage bin.
Three, When pressing and filling, you should pay attention to observation. If you find large pieces of other garbage (non-household waste) that cannot be compressed, you should stop it in time.
Stop the operation, continue the operation after cleaning, avoid damaging the working device of the vehicle, and it is strictly forbidden to compress construction waste..
Four.,When lifting and dropping the filler during the unloading operation, you should check the safety around you, operate carefully, and do not go on the slope.
.Lift the loader, otherwise it is easy to shift the center of gravity back and cause a rollover accident.
5,The filler must not enter normal driving before it falls and is locked.




Our company makes the following commitments to the after-sales service of the vehicle:

After-sales service commitment
1	Technical training program	The supplier is responsible for free training of equipment users at the user's location before handing over the car to the user for use, mainly from the driver's operation of the hydraulic system and special equipment to familiarize himself with the basic principles of the vehicle and the ability to deal with general faults.
2	.After-sales service method	The maintenance of the chassis part can be solved at the chassis manufacturer service station closest to the user's use. For the distribution location, technical strength and contact information, please refer to the chassis Maintenance Manual for details. For the maintenance of the special device part, you can use the contact information of telephone and fax. We will give a processing plan within 2 hours after receiving the user's call, and if necessary, we will send professional maintenance personnel to the place of use within 24-48 hours to solve the problem.
Three	Free maintenance plan	The "three-warrantee" period of the equipment provided by the supplier is one year or 30,000km. During the "three-warrantee" period, the free maintenance of the chassis part is carried out at the Dongfeng Automobile Technical Service Station where the user is located, and the free maintenance of the special device part is carried out by the supplier to send professional and technical personnel.In case of quality failure caused by illegal operation or improper use, accidents, man-made damage, etc., the supplier will provide timely maintenance services, and the maintenance cost shall be borne by the user.
4	Supply and price of accessories after the free maintenance period	After the free maintenance period (after the "three-warrantee" period), if the equipment fails, the accessories need to be replaced. The chassis part can be carried out at the chassis manufacturer's service station, and the special device part is directly supplied by us. The price of accessories is supplied to the user at the cost price, and the maintenance period is lifetime.
5	Agree to do something	If you buy our company's special car, the "three-guarante" period will be implemented for one year or drive 30,000 km, lifelong maintenance, and after-sales service will be in place within 24-48 hours.
6	Service purpose and objectives	Fast, decisive, accurate, thoughtful and thorough; the service quality wins user satisfaction.