Hook-Arm Garbage Truck

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: a Years
• Model NO.: CLW5559TYDF5
• Type: Recycling
• Certification: ISO9000
• Volume: 10001-15000L
• Emission Standard: Euro 4
• Transmission Type: Manual
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: Dongfeng
• Models: Micro
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 7500× 2500× 3060
• Trademark: CLW
• Origin: China
• HS Code: 4801000000
• Production Capacity: 1000

Product Description

                          Dongfeng Tianjin hook arm typeDustcart
Product introduction:
Produced by our companyHook arm typeDustcartIt is mainly applicable to the garbage collection and transfer of municipal sanitation, property management, factories and enterprises, street communities, schools, hospitals, rural areas and other places. It can be customized and supporting the hook arm system according to the user's existing garbage bins..Hook-arm garbage trucks are also called compartment removable garbage trucks.,.The hook arm garbage truck adopts a full hydraulic control system, which can be optionally equipped with a fully automatic control system integrated with hand and electricity, which realizes two control modes in the cab and outside the car. It can be used with multiple three-way garbage bins. The garbage bin and the chassis can be completely separated. The hydraulic control system controls the expansion of the hook arm and the locking structure to realize the garbage bin. The lifting and lowering can realize self-dumping and dumping when locking the garbage bin. It has the advantages of reasonable structure, simple operation, stability, high efficiency of use, good sealing performance, convenient dumping, etc. It can realize the joint operation of one car and multiple garbage bins, multi-point drop of garbage bins, circular transportation, and fully improve the transportation capacity of the vehicle. Force, secondary pollution can be effectively avoided in the process of loading, unloading and transportation.
Main technical parameters: 

.[Main Technical Parameters]
Product name	Car removable garbage truck	Product number	AR0RE76005G.
Total mass (Kg)	18,000	Tank volume (m3)
Rated Load Mass (Kg)	9855	Dimensions (mm)	7500 x 2500 x 3060,3160
Prepared mass (Kg)	7950,7600,7250	The number of passengers in the cab (persons)	2,3
Approach angle/departure angle (°)	25th 17th	Front suspension/rear suspension (mm)	One,400/1,400
Number of axes	2	Wheelbase (mm)	4700
Shaft load (Kg)	6,500/11500.	Maximum speed (Km/h)	89
Other	.The car chooses a wheelbase 4700 (mm) wheelbase chassis, and the correspondence between the long wheelbase front suspension and rear suspension is (mm): 7500/4700/1400/1400,;2. The side and rear protection materials are: Q235, connection method: the left and right sides and the rear lower protection are all bolted, the rear protection cross-section size (mm): 200×50, the rear protection ground height (mm): 450; 3. ABS Model: 3631010-C2000, ABS 8,4460046450, ABS Manufacturer: East Cocknoll Commercial Vehicle Brake System (Shiyan) Co., Ltd., East Cocknoll Commercial Vehicle Brake System (Shiyan) Co., Ltd., Weberco Automobile Control System (China) Co., Ltd., J ABS/Jiao Zuo Berick Control Technology Co., Ltd., the car is equipped with a driving recorder with a satellite positioning system;Four. Optional cab with the chassis; optional exhaust pipe installation position with the chassis; optional appearance style. 5. The car is used for garbage collection and transportation, and the main special device is the hook arm system; 6. Engine model/fuel consumption value (L/100km): DDi50E190-60/23.9, D4.5NS6B190/24.4, D6.7NS6B230/23.7, B6. 2NS6B210/23.8,B6.2NS6B230/23.8,DDi50E220-60/25.1
[Technical parameters of chassis]
Chassis model	DFH1180EX8.	Name of the chassis	.Cargo vehicle chassis (Class II)
Trademark name	Dongfeng brand	Manufacturing enterprise	Dongfeng Commercial Vehicle Co., Ltd.
Dimensions (mm)	8230 x 2500 x 3050	Number of tires	6
Approach angle/departure angle (°)	17/24, 17/18, 17/13, 19/20	Tire specifications	10.00R20 18PR,
The number of steel plate springs	7/9+6,8/10+8,	Front wheelbase (mm)	1815,1860
Types of fuel	Diesel oil	Rear wheelbase (mm)	1800,1840
Emission standards	GB17691-2018 Country VI
Engine model	Engine manufacturers	Discharge (ml)	Power (Kw)
D6.7NS6B230. B6.2NS6B210.	Dongfeng Cummins Engine Co., Ltd. Dongfeng Cummins Engine Co., Ltd.	6700 6200	169 154

Product breakdown diagram:

Product features:
High-end appearance
The garbage bin matched with the removable garbage truck in the carriage is a mobile horizontal garbage bin, with four casters and locking devices at the bottom, and a hanging ring at the front, which can be hoisted or unloaded from the vehicle body, and can also be used with a mobile compressed garbage station.
The arm hook is installed on the chassis of the car and is used for lifting, unloading from the trash can or dumping garbage. It is mainly composed of hook arm, hook arm frame, auxiliary beam and hydraulic cylinder, etc. The secondary beam is mainly used to fix and support the garbage can with the chassis, and is used as an installation connecting frame for other parts. The pull arm and hook arm frame are mainly used for lifting, unloading and dumping garbage. The hydraulic cylinder is the driving part of each action.
Good sealed performance
The removable garbage truck adopts a fully enclosed garbage bin, which can effectively avoid secondary pollution and noise pollution during loading and transportation, which is extremely beneficial to protecting the environment. It is a new type of garbage collection and transportation truck.
Easy to use and simple to operate
.The top cover system can be opened and closed normally in a relatively short time. The loading and unloading process is not affected, and the driver can complete all the operation processes of the vehicle alone. The truck can pull the garbage in the underground garbage bin and the garbage bin to the car for transportation and dump at the same time, which reduces the labor intensity of workers. The garbage collection and transportation method of this garbage truck is the garbage collection and transportation method widely adopted in the world at present, which can realize multiple boxes in one truck, greatly reducing the equipment cost and space, etc.
Multiple choices, on-demand customization
According to user needs, the removable sanitation garbage truck sealing cover of the carriage is designed as a side flip, folding cover, front sliding cover, and fully sealed side opening small doors. At the same time, all garbage truck rear covers can be designed to be manually or hydraulically closed.
Operation method and steps:
Hook box operation:
1. Drive the vehicle to about 2.5 meters in front of the garbage bin, and the vehicle and the box should be in a straight line as much as possible.
2. Hydraulic pump force: start the engine, step on the clutch, pull up the handle of the take-on, and then slowly release the clutch.
3. Rotate the "off/power/on" knob of the control box to the "on" position. At this time, the buzzer of the operation box sounds to indicate that the control power supply is on.
4. Rotate the "lock/loose" knob to the "loose" position and hold it for 5-8 seconds. The arm lock is in a completely loose position. Let go and no longer rotate the knob.
.5. Rotate the "extch/hook arm/shrink" knob to the "extch" position. At this time, the main cylinder extends and maintains this operation until the main arm hook flips slightly lower to the hook center of the trash can. Let go of the hand and no longer rotate the knob.
6. Turn off the power take-off: step on the clutch, press down the power take-off handle, and release the clutch.
7. Hang the vehicle in reverse gear and drive backwards until the pull arm hooks to the center of the trash can.
8. Hydraulic pump force again, rotate the "extch/hook arm/shrink" knob to the "shrink" position. At this time, the main cylinder is shortened, and this operation is maintained until the trash can is pulled to the vehicle. When hooking the box, ensure that the track of the box enters the middle of the two guide wheels of the arm hook. If it deviates from the middle of the guide wheel, the vehicle can be moved To adjust the position and angle of the vehicle and the garbage bin to meet the requirements of the middle.
9. Rotate the "lock/loose" knob to the "lock" position, hold it for 5 to 8 seconds, until the arm lock hook is in a fully locked position, release the hand, and no longer rotate the knob.

1. Turn off the power supply, the power knob of the control box, and the hook box action is completed.

Self-dumping operation:

1. Drive the vehicle to the place where garbage is dumped, observe the ground of the place, and require the ground to be flat, strong and without unloading obstacles.
2. Open the back door of the trash can.

3. Rotate the "off/power/on" knob of the control operation box to the "on" position. At this time, the buzzer of the operation box sounds to indicate that the control power supply is turned on.
4. Hydraulic pumping force.
5. Rotate the "lock/loose" knob to the "lock" position, hold it for 5-8 seconds, until the arm lock hook is in a fully locked position, release the hand, and no longer rotate the knob. Make sure that the big arm lock is in a fully locked position.
6. Rotate the "extch/hook arm/shrink" knob to the "extch" position. At this time, the main cylinder extends, and the garbage bin is lifted together with the lifting frame and the main arm. Maintain this operation until the garbage bin is completely lifted and the garbage in the box is completely dumped cleanly.
7. Rotate the "stretch/hook arm/shrink" knob to the "shrink" position. At this time, the main cylinder is shortened, and the garbage bin is slowly retracted with the lifting frame and the main arm. Maintain this operation until the garbage bin is completely withdrawn and placed on the vehicle. Stop rotating the knob.
.8. Turn off the power take-off, turn off the power knob of the control box, and close the rear door of the trunk. The self-dunloading operation is completed.

Unpacking operation:
The process of unloading the box is the opposite of the operation process of the hook box. It is to place the garbage box from the vehicle to the ground. The key point is: before unloading the box, the arm lock hook should be completely loose.
1. Before unloading the box, you should observe whether the unloading position is sufficient, and the ground should be flat and solid.
2. Hydraulic pumping force; rotate the "off/power/on" knob of the control box to the "on" position.
3. Rotate the "lock/loose" knob to the "loose" position and hold it for 5-8 seconds. The arm lock is in a completely loose position. Let go and no longer rotate the knob.Make sure that the big arm lock is in a completely loose position.
4. Rotate the "extch/hook arm/shrink" knob to the "extch" position. At this time, the main cylinder stretches and the trash can moves with the main arm. Keep this operation until the trash can is completely placed on the ground, and release the knob.
5. Drive the vehicle forward about 0.5-1 meters.
6. Rotate the "extch/hook arm/shrink" knob to the "shrink" position. At this time, the main cylinder is shortened and the main arm is retracted. Keep this operation until the main arm is completely retracted, and release the knob.
7. Turn off the power take-off, turn off the power knob of the control box, and complete the unloading operation.

Precautions:
1. Before loading garbage, the sleeve-arm garbage truck reaches no-load operation to6 At the standard air pressure, the power take-up device (at the bottom left of the steering wheel in the cab) can be hung up, check whether there is any leakage or abnormality in each component, and then operate according to the position indicated by the operating sign. Under normal circumstances, do not adjust the pressure of the pressure regulating valve. The vehicle has been adjusted before leaving the factory.
Two. The weight of the garbage in the garbage compartment should not exceed the allowable range of the vehicle. Otherwise, it will cause excessive pressure and damage to hydraulic parts during packing. If it is light, it will cause oil leakage, slippage of the clutch wheel, and serious cases, it will cause the clutch to burn to death.
3. The compartment removable garbage truck should ensure the longitudinal beam position of the compartment before packing.Between the rollers at the rear of the auxiliary beam, ensure that the longitudinal center axis of the vehicle coincides with the longitudinal center axis of the box, otherwise, the position of the vehicle should be adjusted.
Four. When the removable garbage truck is loading the garbage bin, the throttle can be appropriately increased according to the weight of the garbage collected in the carriage, so that the garbage compartment can be smoothly raised to realize the packing.
5. At the end of the operation, the electromagnetic clutch switch should be turned off in time to ensure that the electromagnetic clutch is in a power-off state. In particular, it should be reminded that when the car is turned off, the electromagnetic clutch should be turned off, otherwise it will cause a large amount of battery power consumption, resulting in power loss and the vehicle cannot start normally.

Maintenance and upkeep:
1. Doing a good job in the cleaning of the pull-arm car is a prerequisite for the maintenance and upkeep of the pull-arm car.
2. Inject lithium-based lubricating oil into each lubrication point before using the pull-arm car for the first time and regularly (must be carried out once a week).
3. Check the liquid level height of the hydraulic oil tank frequently. Before working, make sure that the hydraulic oil surface of the oil tank is in the middle of the oil tank observation window. When it is too little, add an appropriate amount of hydraulic oil in time.
4. Replace the hydraulic oil of the corresponding label in a timely manner according to the climate. Use No. 46 wear-resistant hydraulic oil in the season and No. 32 wear-resistant hydraulic oil in winter.
5. Clean the return oil filter element of the hydraulic oil tank every six months. If the filter element is damaged, it should be replaced in time.
6. For the maintenance of the chassis, please refer to the maintenance manual of the chassis information.
Our company makes the following commitments to the after-sales service of the vehicle:

After-sales service commitment
1	Technical training program	The supplier is responsible for free training of equipment users at the user's location before handing over the car to the user for use, mainly from the driver's operation of the hydraulic system and special equipment to familiarize himself with the basic principles of the vehicle and the ability to deal with general faults.
2	After-sales service method	The maintenance of the chassis part can be solved at the chassis manufacturer service station closest to the user's use.For the distribution location, technical strength and contact information, please refer to the chassis Maintenance Manual for details. For the maintenance of the special device part, you can use the contact information of telephone and fax. We will give a processing plan within 2 hours after receiving the user's call, and if necessary, we will send professional maintenance personnel to the place of use within 24-48 hours to solve the problem.
Three	Free maintenance plan	The "three-warrantee" period of the equipment provided by the supplier is one year or 30,000km. During the "three-warrantee" period, the free maintenance of the chassis part is carried out at the Dongfeng Automobile Technical Service Station where the user is located, and the free maintenance of the special device part is carried out by the supplier to send professional and technical personnel. Such as illegal operation or improper use, accidents, man-madeFor quality failures caused by damage, etc., the supplier will provide timely maintenance services, and the maintenance cost shall be borne by the user.
4	Supply and price of accessories after the free maintenance period	After the free maintenance period (after the "three-warrantee" period), if the equipment fails, the accessories need to be replaced. The chassis part can be carried out at the chassis manufacturer's service station, and the special device part is directly supplied by us. The price of accessories is supplied to the user at the cost price, and the maintenance period is lifetime.
5	Agree to do something	If you buy our company's special car, the "three-guarante" period will be implemented for one year or drive 30,000 km, lifelong maintenance, and after-sales service will be in place within 24-48 hours.
6	Service purpose and objectives	Fast, decisive, accurate, thoughtful and thorough; the service quality wins user satisfaction.