Jiangling Small Compression Garbage Truck with Lower Chamber

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: a Years
• Model NO.: CLW5689TYDF5
• Certification: ISO9000
• Volume: 6001-10000L
• Emission Standard: Euro 4
• Transmission Type: Manual
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: FOTON
• Models: Micro
• Usage: Dump, Sealed
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 5600× 2000× 2280
• Trademark: CLW
• Origin: China
• HS Code: 8501101000
• Production Capacity: 1000

Product Description

          VictoryParameters of Malaysia 4-way blue-card compressed garbage tr
Model introduction:
The compressed garbage truck is composed of a sealed garbage box, a hydraulic system and an operating system. The whole vehicle is fully sealed. The sewage in the process of self-compression, self-dumping and compression all enters the sewage compartment, which completely solves the problem of garbage transportation.Secondary pollutionThe problem avoids inconvenience to people. The key parts are imported parts, which have the advantages of high pressure, good sealing, convenient operation, safety and so on. Optional configuration.A variety of back-hanging bucketsFlipping mechanism or garbage bucket flipping mechanism.

Main technical parameters:Chassis configuration:

[Main Technical Parameters]
Product trademark	Cheng Liwei brand	Announcement batch	385
Product name	CLW5070Z.Type compressed garbage truck	Product number	EBS385R7304.
Total mass (Kg)	7300	Tank volume (m3)
Rated Load Mass (Kg)	1620	Dimensions (mm)	6735 x 100 x 2550
Prepared mass (Kg)	5550	Cargo compartment size (mm)	××
Rated passenger capacity (person)		Total mass of quasi-tow truck (Kg)
The number of passengers in the cab (persons)	2	Load mass utilization coefficient
Approach angle/departure angle (°)	14/20	Front suspension/rear suspension (mm)	.1,075/2000.
Number of axes	2	Wheelbase (mm)	3360
Shaft load (Kg)	2600/4700.	Maximum speed (Km/h)	80
Other	1. The rear extension of the car is: 300mm. Two. Side protection device material: Q235B carbon steel, connection method: bolt connection. The rear protection is replaced by a special device, and the minimum ground height is 410mm. 3. ABS system model: VIE ABS-II, ABS system manufacturer: Zhejiang Wan'an Technology Co., Ltd.Four. The engine model/fuel consumption value correspondence is (L/100km): JX4D30D6H/13.9. 5. Special device: hydraulic mechanism and filler, mainly used for the transportation of urban sanitation garbage. 6. Optional rear flip style, optional upper appearance style. 7. Optional hydraulic oil tank multi-way valve electronic control box position. Eight. Optional filler style.
[Technical parameters of chassis]
Chassis model	JX1071TG26.	Name of the chassis	Cargo vehicle chassis (Class II)
Trademark name	Jiangling brand	Manufacturing enterprise	Jiangling Automobile Co., Ltd.
Dimensions (mm)	5840,5860×1960,1865×2085,2035,2110	Number of tires	6
Approach angle/departure angle (°)	20/15, 20/17	Tire specifications	7.00R16LT 14PR
The number of steel plate springs	8/8+7.5/4+3.5/3+4.5/4+4.5/4+5.5/6+5.5/5+5.8/6+5	Front wheelbase (mm)	1575,1466
Types of fuel	Diesel oil	Rear wheelbase (mm)	1508,1440
Emission standards	GB3847-2005, GB17691-2018 Country VI
Engine model	Engine manufacturers	Discharge (ml)	Power (Kw)
JX4D30D6H. JX493ZLQ6C. JX493ZLQ6A.	Jiangling Automobile Co., Ltd. Jiangling Automobile Co., Ltd. Jiangling Automobile Co., Ltd.	2892 2771 2771	85 90 90

The new Isuzu 1580 white single-row reversible cab, Yunnai D20TCIF1 national six engine, 126 horsepower (93kw), 160MM beam, width on both sides of the beam 740MM, 6-speed gearbox,Big power takerWindow, 6.00R15 tires, oil brake, 24V double camel battery, 1043 rear axle, rotation, ABS, original air conditioner. Electronic instruments, seat belt prompts. Remote emission monitoring terminal.

Top-loading configuration table:

.Order	Name	Specifications and models
1	Chassis name/model	Kaima series
2	Wheelbase (mm)	3360
Three	The volume of the box is m3	6 (Ensure that 75 barrels of standard 240L trash cans can be loaded)
4	Box thickness mm	Wugang Q345 low-alloy manganese steel (Edge four bottom.IV) The flipping mechanism scraper, arc bottom plate and slide adopt Q710 high-strength plate
5	Sewage tank	There is a sewage sink on the front of the large box, and one at the bottom of the filler.OneAss-style sewage tank
6	Box shape	Arc, the side plate is the whole plate for one-time molding, no welding
.7	Hydraulic cylinder	Hypris
8	Oil pump	Changyuan
9	.Multi-way valve	Zhongmei, Yangzhou, Jiangsu Province
Ten	Hydraulic oil pipe	Bonway hydraulic oil pipe (high-density double-layer 24Mpa)
11	System rated pressure	18 MPa
12	Compression ratio	≥0.85
13	Consolidation method	Two-way peristaltic compression
14	Control system	German Siemens PLC and German photoelectric sensors
15	Loading single cycle time	≤24 s
16	Time to dump garbage	≤35 s
17	Control method	Independent operation of the handsplet (Standard remote control)
18	Door boltPiece structure	Reinforced with cast steel parts
19	Shovel and skateboard slider	Highly wear-resistant nylon
20	The design of the whole vehicle	Use SW three-dimensional software to simulate
21	EmpressThe way to hang the bucket	Standard configuration: rear-turning barrel type (can be hung with national standard 240Plastic bucket orIron barrel or triangular bucket
22	Body color/text	Body color and textPainting can be pressedCustomization required by customers
22	Attachment	Profile light, side light, work light

Product highlights:

1. Larger loading capacity: The loading capacity of boxes with the same volume is increased per side compared with the previous generation.5 percent (Multi-pack.7Bucket240 LDustbin).
2. Easy to fault position: scraper skateboard under forceThe position is universalIt is easy to deform by force, resulting in unstable work. The new generation of products developed by our company has innovated in terms of materials and design, making the performance of the whole vehicle more stable and improving the service life.
3. Working hours: The new generation of compressed garbage trucks produced by our company is inSlackThe loading time in the fast state is25.Within seconds, the loading time is the longest time used by the vehicle, so it is economical fuel, reduce costs, and improve work efficiency.
4. Wear parts: The scraper is the vehicle with the greatest force, and the slide is the most worn. Our company's slide adopts high strength.Q710.For8mmAbove, the middle of the scraper is strengthened separately, which has greater bearing capacity and wear resistance, which greatly increases the service life.
5. Oil pump: Oil pump is the main component of the compression vehicle. Our company's new generation oil pump is customized foroil pump factory, with stable performance and extremely low failure rate.

6, noise:The new generation of compressed vehicles has added a photoelectric induction device, which can control the travel distance of each action, reduce the metal sound generated during collision and scraping, and effectively improve noise pollution.

Precautions:

1. When operating, irrelevant personnel should be avoided from approaching the vehicle, especially the rear of the vehicle.

 
Two.,Garbage should be evenly put into the filler. Do not concentrate on one side, so that the center of gravity of the vehicle is shifted, or at the mouth of the filler.
Put it too high along the garbage heap,Affect the pressure filling of garbageAnd the garbage is evenly distributed in the garbage can.
Three, Pressure filling homeworkYou should pay attention to observation. If you find large pieces of other garbage (non-household waste) that cannot be compressed, you should stop it in time.
StopWork, continue the work after cleaning, avoid damaging the working device of the vehicle, and it is strictly forbidden to compress construction waste..
Four.,When lifting and dropping the filler during the unloading operation, you should check the safety around you, operate carefully, and do not go on the slope.
Lift the loader, otherwise it is easy to shift the center of gravity back and cause a rollover accident.
5,The filler is not there.Fall and lockBefore, it is not allowed to enter the normal driving.