Food Garbage Truck

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: a Years
• Model NO.: CLW5567TYDF5
• Type: Recycling
• Certification: ISO9000
• Volume: 10001-15000L
• Emission Standard: Euro 4
• Transmission Type: Automatic
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: Dongfeng
• Usage: Swing Arm Type, Sealed, Hang Barrel Type, Arm Type, Compression Type, Eat Hutch Type
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 6360× 2300× 2860
• Trademark: CLW
• Origin: China
• HS Code: 4501100000
• Production Capacity: 1000

Product Description

Overview of vehicles
Dongfeng Dorika Guoliu Kitchen garbage truckYesHigh efficiency, no leakage, high degree of automation, environmentally friendlyKitchen waste collection and transportationEquipment. The car has a beautiful appearance, excellent performance and advanced control. It is mainly used for collection and rotation.Yun hotels, restaurants, restaurantsAnd the kitchen waste generated by the canteens of institutions, colleges and universities can also be used to collect and transfer kitchen waste and household waste in residential communities.

• Layout and appearance photos of kitchen garbage truck series products

II. Kitchen garbage truck series productsDeploy
Dongfeng kitchen garbage truck, adopts Dongfeng Guoliu chassis, engine Guoliu Chaochai 170 horsepower, 5-speed gearbox, 245 vacuum tire, ABS, air conditioner, central control lock, direction assistance, the box adopts dry and wet separation structure, shovel unloading, dry garbage bin 7 cubic meters, wet garbage truck 1 cubic meter, equipped with high-pressure washer, 3 00 clear water box.
III. Working principle of kitchen garbage truck series products
Garbage collection.:Hang the trash can containing kitchen waste on the hanging teeth of the hanging bucket mechanism.,.Operate the control switch,The hanging barrel mechanism lifts and flips along the track under the action of lifting the cylinder and chain. At the same time, the upper cover cylinder controls the upper cover to open, and the garbagePour into the boxInternal,Then take the barrel cylinder back.,The empty barrel fell to the ground.,Close the top cover of the top cylinder,It's a cycle like this. After the garbage is poured into the box, the water and oil in the garbage will automatically flow into the sewage tank through the bottom mesh plate to complete the initial solid-liquid separation.
Garbage compression.:When collecting a certain amount of garbage,Operate the push plate control switch,Make the push plate in the push plate multi-stage cylinderUnder the action, to the back of the boxExercise, carry out garbage compression. During the compression process, the water and oil in the kitchen waste are completely separated under the pressure of the push plate and flow into the sewage tank at the bottom of the box through the mesh plate at the bottom of the carriage.
Garbage dumping.:When the collection and transportation are in place,Unload the garbage.There are two kitchen garbage trucks.There are all kinds of discharge and unloading methods, which are sealed discharge.And pushing and draining (simple type), the process is automatically controlled. When sealing the discharge, after the gate valve is opened, the spiral machine rotates the discharge counterclockwise. At the same time, the push plate is moved back to push the end, and then the screw machine stops turning.Move, close the gate valve, push the plateReturn it to place. When pushing and draining, the rear door lock pin is opened, and the back door is opened through the sequential valve, and thenAfter the door is fully opened, startPush the plate back to push the material,Push out the garbage in the garbage can in a horizontal direction, and then push the plate back into place, and the back door is closed in place, and the lock pin is activated.
IV. Product features of the kitchen garbage truck series
1) Appearance modeling: The transverse cross-section of the garbage bin is a rectangular frame, the longitudinal cross-section is a trapezoidal frame, and the sides and the top are arc-shaped, and the whole machine looks beautiful and generous;
2) Box body: high-strength carbon steel or stainless steel plate is used, and the feeding port is sealed with a sealed cover, which is controlled by a hydraulic cylinder.Close.The compartment is divided intoThe lower two chambers,The upper chamber is a solid garbage can.,The lower chamber is a sedimentary water tank.,The oil used to fill the sediment,Water mixture;
Three) Back door: The back door is equipped with a sealed garbage disposal device, which is controlled by two cylinders, and the lock is controlled by two cylinders.Close the back door,EmpressThe door is sealed with silicone strips.,Adopt electromechanical-hydraulic integrated control,No leakage during use and vehicle operation;
4) Garbage loading mechanism: can be picked upAscend120 L,240 LThe standard trash can, with an automatic safety locking mechanism, can be loaded intoDuring the process, the garbage in the bucket is not spilled and left behind. The trash can has a speed regulation function in lifting and dumping to prevent garbage from splashing;
5) The lifting system and the upper cover opening and closing system have sequential linkage function: the upper cover is not opened., when the push plate does not return to position, the lifting device does not work and a warning is issued. The lifting device can only start loading garbage when it is confirmed that the upper cover has been opened and the push plate has been returned to its position;
6) Garbage compression, solid-liquid separation function: In the process of collection, solids can be separated from oil and water, and garbage can be compressed to maximize loading. The garbage box is equipped with a push plate that moves back and forth, which is driven by a telescopic cylinder, and the push plate is surrounded by a sealing strip. When the switch is manipulated, the push plate begins to compress the water in the compartment, and oil, water and other liquids enter the sedimentation tank under the compartment through the filter net under the compartment to realize the separation of solid and liquid;7) Unloading: When the garbage in the compartment needs to be discharged, you can control the switch, open the back door, and use the pusher to push the garbage out from front to back, which is completely clean.Open the water release valve under the box to clean up the oil, water and other impurities in the sedimentation tank;
8) Control system: use electricity,Liquid joint control, and a safety protection switch is set up. The control parts of each function of the vehicle are concentrated in the electronic control box on the right side of the garbage lifting rack, which is highly reliable and safe, ensuring the accurate operation of each mechanism;
9) The main components of the hydraulic system adopt well-known products at home and abroad;Yangzhou Zhongmei multi-way valve, long-source pump.
Ten)BrushCar function.:The car is equipped with a stainless steel water tank and a high-pressure water pump.,Used for cleaning vehicles.After the vehicle is operated, the whole vehicle should be cleaned, the water pump switch should be turned on, and the vehicle should be cleaned with a high-pressure spray gun;
11) Sealed garbage dischargeGarbage function: When discharging garbage, do not open the back door, connect the garbage discharge port with the feeding port of the pool, and the garbage can be directly discharged into the pool. Environmental protection and safety, reduce pollution to the environment;
12) Both sides of the back door have.Safety protection device. When opening the door for operation, lower the rear door safety frame on both sides of the vehicle to avoid safety accidents caused by the operator due to misoperation;
13) The main components are made of high-strength carbon steel, and high-quality protective coatings are used to play the role of acid and alkali resistance and corrosion resistance; mainlyComponent box,Back door body,Spiral machines and water tanks can also be made of stainless steel.,Strong resistance to acid and alkali and other corrosive substances;
14).Automatic control of engine power outputCut out(Optional),Fully automatic control of engine power output,When it is not homework,Engine idling state,During operation, the engine automatically accelerates to meet the requirements of operation power. It avoids power loss and system heating, reduces fuel consumption, and has good economy.

Total mass (Kg)	11995	Tank volume (m3)
Rated Load Mass (Kg)	.6420	Dimensions (mm)	6360×2200,2300×2860,2950
Prepared mass (Kg)	5380	Cargo compartment size (mm)	××
Rated passenger capacity (person)		Total mass of quasi-tow truck (Kg)
The number of passengers in the cab (persons)	Three	Load mass utilization coefficient
Approach angle/departure angle (°)	13/21	.Front suspension/rear suspension (mm)	1,130/1430
Number of axes	2	Wheelbase (mm)	3800,3950,4050,4100,4400,3600
Shaft load (Kg)	4,350/7,645	Maximum speed (Km/h)	103
Other	The car is used for kitchen garbage collection and transportation. The main special devices are garbage bins and trash can lifting devices; the chassis is optionally equipped with front masks, front bumpers, front combination lamps, front fog lights, and semi-cabs;The material of the side/rear protection device is Q235, connection method: bolt connection and fixation, rear protection cross-section size (width × height) (mm): 60 x 120, rear protection ground height (mm): 460. ABS Model/Manufacturer: ABS Model: ABS/ASR-24V-4S/4M, Manufacturer: Xiangyang Dongfeng Longcheng Machinery Co., Ltd.
[Technical parameters of chassis]
Chassis model	EQ1125SJ8CDC.	Name of the chassis	Cargo vehicle chassis (Class II)
Trademark name	Dongfeng brand	Manufacturing enterprise	Dongfeng Automobile Co., Ltd.
Dimensions (mm)	6725,7100,7190,7740,6015,6785×2165,2350×2410,2535	Number of tires	6
Approach angle/departure angle (°)	14/21	Tire specifications	245/70R19.5,8.25R20
The number of steel plate springs	8/10+7,12/12+9	.Front wheelbase (mm)	1745,1802,1820,1842
Types of fuel	Diesel oil	Rear wheelbase (mm)	1630,1650,1800,1720
Emission standards	GB3847-2005, GB17691-2018 Country VI
Engine model	Engine manufacturers	Discharge (ml)	Power (Kw)
YCY 30165-60	Guangxi Yuchai Machinery Co., Ltd.	2970	121
CY4SK261.	Dongfeng Chaoyang Chaochai Power Co., Ltd.	3856	125

Note: This parameter is the standard configuration of the manufacturer, and the actual parameter varies according to the customer's needs. It should be included in the Beijing brand.
After-sales service commitment
1. Warranty period, scope and warranty conditions
The after-sales service of the chassis part and the auxiliary engine shall be carried out by the user unit at the local technical service station.
.Maintenance (not covered by the upper installation warranty). The modification part is implemented by our company, and the warranty period is 12
Months, except for consumable parts, the quality problems (except for man-made damage) of the vehicle during the warranty period shall be
Free maintenance. After the expiration of the warranty period, our company will carry out lifelong maintenance of its products, working hours, travel expenses,
The repair fee is only calculated at cost.
2. Solve problems and troubleshoot (technical support)
When the supplied vehicle fails, after receiving the user's fault call, solve the quality or operation problem response
The time is 24 hours, and the mail delivery time is 72 hours. When we need after-sales personnel to solve the problem, our public
The personnel of the after-sales service department will arrive at the site within 72 hours to provide services.