China Isuzu Compression Garbage Truck

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: a Years
• Model NO.: CLW57457TYDFW5
• Type: Recycling
• Certification: ISO9000
• Volume: 6001-10000L
• Emission Standard: Euro 4
• Transmission Type: Manual
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: FOTON
• Models: Micro
• Usage: Dump, Sealed
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 5600× 2000× 2280
• Trademark: CLW
• Origin: China
• HS Code: 8501101000
• Production Capacity: 1000

Product Description

          VictoryParameters of Malaysia 4-way blue-card compressed garbage tr
Model introduction:
The compressed garbage truck is composed of a sealed garbage box, a hydraulic system and an operating system. The whole vehicle is fully sealed. The sewage in the process of self-compression, self-dumping and compression all enters the sewage compartment, which completely solves the problem of garbage transportation.Secondary pollutionThe problem avoids inconvenience to people. The key parts are imported parts, which have the advantages of high pressure, good sealing, convenient operation, safety and so on. Optional configuration.A variety of back-hanging bucketsFlipping mechanism or garbage bucket flipping mechanism
Main technical parameters:

[Main Technical Parameters]
Product trademark	Huatong brand	Announcement batch	352
Product name	HCQ5070ZYSQL6 type compressed garbage truck	Product number	AR3DV729036.
Total mass (Kg)	7300	Tank volume (m3)
Rated Load Mass (Kg)	1830,1750,1550,1490,1400	Dimensions (mm)	6430,6555,6850×2200,2080×2475
Prepared mass (Kg)	5340,5420,5620,5680,5770	Cargo compartment size (mm)	××
Rated passenger capacity (person)		Total mass of quasi-tow truck (Kg)
The number of passengers in the cab (persons)	2	Load mass utilization coefficient
Approach angle/departure angle (°)	24/14.24/8	Front suspension/rear suspension (mm)	1015/2055, 1015/2063, 1015/2060, 1015/2155
Number of axes	2	Wheelbase (mm)	3360
Shaft load (Kg)	2580/4720.	Maximum speed (Km/h)	95
Other	The car achieves the operation functions of garbage collection, loading, pushing and unloading through garbage bins, filling mechanisms and other devices;The car has 6 configurations: A (no loading device, basic type), B (optional bucket lifting device), C (optional bucket device), D (optional bucket turning device), E (optional flipping bucket device), F (iron bucket device). When configuring A, the preparation mass is 5340kg and the rated load mass is 1830kg; when configuring B, C and F, the preparation mass is 5420kg and the rated load mass is 1750kg; when D and E are configured, the preparation mass is 5620kg and the rated load mass is 1550kg; when configuring A, the length of the whole vehicle is 64 30mm, rear suspension 2055mm, departure angle 14°; when configured with B, the length of the whole vehicle is 6555mm, the rear suspension is 2063mm, the rear extension is 117mm, and the departure angle is 8°; when C and F are configured, the length of the whole vehicle is 6850mm, the rear suspension is 2060mm, the rear extension is 415mm, and the departure angle is 14°;When configuring D, the length of the whole vehicle is 6555mm, the rear suspension is 2063mm, the rear extension is 117mm, and the departure angle is 14°; when E is configured, the length of the whole vehicle is 6850mm, the rear suspension is 2155mm, the rear extension is 320mm, and the departure angle is 14°. The material of the side protection device is Q235, and the connection method is welded connection. The side skirt is optional to replace the side protection device. When the side skirt is optional, it is only for configuration C and E. The preparation mass when C is configured is 5680kg, the rated load mass is 1490kg, the preparation mass when E is configured is 5770kg, and the rated load The volume is 1400kg, and the rest of the parameters remain unchanged. The rear protective device is replaced by a working device, and the ground height of the working device is 370mm; the chassis is equipped with a 4KH1CN6LB engine, and the corresponding fuel consumption value (L/100km) is 16.12; Optional brake system with the chassis: when installing the hydraulic brake system, the corresponding relationship between ABS and its controller model/production enterprise is: APG3550500A/Zhejiang Asia-Pacific Electromechanical Co., Ltd., CM4YL/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd.; When installing the pneumatic pressure dynamic system, The corresponding relationship of ABS and its controller model/production enterprise is: CM4XL-4S/4M/Guangzhou Ruili Kemi Automotive Electronics Co., Ltd. The front face style of the cab is optional with the chassis. Optional body appearance style and rear flip style.
[Technical parameters of chassis]
Chassis model	QL1070BUHACY.	Name of the chassis	.Cargo vehicle chassis (Class II)
Trademark name	Isuzu brand	Manufacturing enterprise	Automobile Co., Ltd.
Dimensions (mm)	5900×1880×2200	Number of tires	6
Approach angle/departure angle (°)	16/24	Tire specifications	7.00R16LT 14PR, 7.00-16LT 14PR
The number of steel plate springs	8/6 plus 5	Front wheelbase (mm)	1504
Types of fuel	Diesel oil	Rear wheelbase (mm)	1425
Emission standards	GB17691-2018 Country VI
Engine model	Engine manufacturers	Discharge (ml)	Power (Kw)
4KH1CN6LB	Isuzu (China) Engine Co., Ltd.	299	88

The new Isuzu 1580 white single-row reversible cab, Yunnai D20TCIF1 national six engine, 126 horsepower (93kw), 160MM beam, width on both sides of the beam 740MM, 6-speed gearbox,Big power takerWindow, 6.00R15 tires, oil brake, 24V double camel battery, 1043 rear axle, rotation, ABS, original air conditioner. Electronic instruments, seat belt prompts. Remote emission monitoring terminal.

Product highlights:

1. Larger loading capacity: The loading capacity of boxes with the same volume is increased per side compared with the previous generation.5 percent (Multi-pack.7Bucket240 LDustbin).
2. Easy to fault position: scraper skateboard under forceThe position is universalIt is easy to deform by force, resulting in unstable work. The new generation of products developed by our company has innovated in terms of materials and design, making the performance of the whole vehicle more stable and improving the service life.
3. Working hours: The new generation of compressed garbage trucks produced by our company is inSlackThe loading time in the fast state is25.Within seconds, the loading time is the longest time used by the vehicle, so it is economical fuel, reduce costs, and improve work efficiency.
4. Wear parts: The scraper is the vehicle with the greatest force, and the slide is the most worn. Our company's slide adopts high strength.Q710.For8mmAbove, the middle of the scraper is strengthened separately, which has greater bearing capacity and wear resistance, which greatly increases the service life.
5. Oil pump: Oil pump is the main component of the compression vehicle. Our company's new generation oil pump is customized for oil pump factory, with stable performance and extremely low failure rate.

6, noise:The new generation of compressed vehicles has added a photoelectric induction device, which can control the travel distance of each action, reduce the metal sound generated during collision and scraping, and effectively improve noise pollution.

Precautions:

1. When operating, irrelevant personnel should be avoided from approaching the vehicle, especially the rear of the vehicle.

 
Two.,Garbage should be evenly put into the filler. Do not concentrate on one side, so that the center of gravity of the vehicle is shifted, or at the mouth of the filler.
Put it too high along the garbage heap,Affect the pressure filling of garbageAnd the garbage is evenly distributed in the garbage can.
Three, Pressure filling homeworkYou should pay attention to observation. If you find large pieces of other garbage (non-household waste) that cannot be compressed, you should stop it in time.
StopWork, continue the work after cleaning, avoid damaging the working device of the vehicle, and it is strictly forbidden to compress construction waste..
Four.,When lifting and dropping the filler during the unloading operation, you should check the safety around you, operate carefully, and do not go on the slope.
Lift the loader, otherwise it is easy to shift the center of gravity back and cause a rollover accident.
5,The filler is not there.Fall and lockBefore, it is not allowed to enter the normal driving.
Our company makes the following commitments to the after-sales service of the vehicle:

After-sales service commitment
1	Technical training program	The supplier is responsible for free training of equipment users at the user's location before handing over the car to the user for use, mainly from the driver's operation of the hydraulic system and special equipment to familiarize himself with the basic principles of the vehicle and the ability to deal with general faults.
2	.After-sales service method	The maintenance of the chassis part can be solved at the chassis manufacturer service station closest to the user's use. For the distribution location, technical strength and contact information, please refer to the chassis Maintenance Manual for details. For the maintenance of the special device part, you can use the contact information of telephone and fax. We will give a processing plan within 2 hours after receiving the user's call, and if necessary, we will send professional maintenance personnel to the place of use within 24-48 hours to solve the problem.
Three	Free maintenance plan	The "three-warrantee" period of the equipment provided by the supplier is one year or 30,000km. During the "three-warrantee" period, the free maintenance of the chassis part is carried out at the Dongfeng Automobile Technical Service Station where the user is located, and the free maintenance of the special device part is carried out by the supplier to send professional and technical personnel.In case of quality failure caused by illegal operation or improper use, accidents, man-made damage, etc., the supplier will provide timely maintenance services, and the maintenance cost shall be borne by the user.
4	Supply and price of accessories after the free maintenance period	After the free maintenance period (after the "three-warrantee" period), if the equipment fails, the accessories need to be replaced. The chassis part can be carried out at the chassis manufacturer's service station, and the special device part is directly supplied by us. The price of accessories is supplied to the user at the cost price, and the maintenance period is lifetime.
5	Agree to do something	If you buy our company's special car, the "three-guarante" period will be implemented for one year or drive 30,000 km, lifelong maintenance, and after-sales service will be in place within 24-48 hours.
6	Service purpose and objectives	Fast, decisive, accurate, thoughtful and thorough; the service quality wins user satisfaction.