| Customization: | Available |
|---|---|
| After-sales Service: | Complete Vehicle |
| Warranty: | a Years |
|
Still deciding? Get samples of US$ 45000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Project | Parameter | Remarks | |
| Model | The whole vehicle model | CL5125ZYSBEV. | |
| Chassis model | .CL1120JBEV. | ||
| Quality parameters | The maximum total mass (Kilogram) | 12495 | / |
| Quality of preparation (Kilogram) | 7960,8150,8270,8350,7780,7950,8070,8150 | / | |
| Load quality (Kilogram) | 4340.4150,4030,3950,4520,4350,4230,4150 | / | |
| Size parameters | The size of the whole vehicle (Mm) | 7680,7390,7450,7500,7240,6950,7010,7060×2430,2380×2630 | / |
| Wheelbase (Mm) | 3800 | / | |
| Move forward/Back suspension (Mm) | 1,250/2240 | / | |
| Move forward/Rear wheelbase (Mm) | 1895/1802 | / | |
| Power battery | Battery type | Lithium iron phosphate | / |
| Battery manufacturer | China Innovation Aviation | / | |
| Battery power (Kilowatt hour) | 142.19 | / | |
| Electric machinery | Type | Permanent magnet synchronous motor | / |
| Rated/Peak power (.Kilowatt) | 120/200. | / | |
| Rated/Peak torque (Nm) | 200/500. | / | |
| Rated/Peak speed (Rpm) | 5730/12000. | / | |
| Other | .The maximum speed (Km/h) | 90 | / |
| Mileage (Kilometre) | 270 | Isospeed method | |
| Charging time (min) | 35 | Three0%-80%SOC. | |
| Top-loading parameters | The volume of the box | .8.5Medium size Three | / |
| The volume of the filler | 0.7Medium sizeThree | / | |
| The volume of the filler sewage tank | 340Large size | / | |
| The volume of the side-hanging sewage tank | 360 L | / | |
| Loading cycle time | ≤25 s | / | |
| Unloading cycle time | ≤45s | / | |
| Flip the cycle time of the mechanism | ≤10s | / | |
| Rated pressure of hydraulic system | 18 MPa | / | |
| Type of barrel turning mechanism | 2 240L plastic buckets (standard configuration) | / | |
| 660L barrel turning mechanism (standard configuration) | / | ||
| .Semi-sealed bucket (optional) | / | ||
| Order | .Name | Specifications and models |
| 1 | Chassis name/model | Dongfeng D9 series |
| 2 | Wheelbase (mm) | 5300 |
| Three | The volume of the box is m3 | 18(Ensure that the standard 240L trash can can be loaded360 to 380Barrel) |
| 4 | Box thickness mm | .Wugang Q345 low-alloy manganese steel (side five and bottom five) flipping mechanism scraper, arc bottom plate, slide adopts Q710 high-strength plate |
| 5 | Sewage tank | There is a sewage sink on the front of the large box, and an integrated sewage tank at the bottom of the filler. |
| 6 | Box shape | Arc, the side plate is the whole plate for one-time molding, no welding |
| 7 | Hydraulic cylinder | Hengli |
| 8 | Oil pump | Changyuan |
| 9 | .Multi-way valve | Yangzhou Jiangyan 3+2 multi-way valve |
| Ten | Hydraulic oil pipe | Bonway hydraulic oil pipe |
| 11 | System rated pressure | 18 MPa |
| 12 | Compression ratio | ≥0.85 |
| 13 | Consolidation method | Two-way peristaltic compression |
| 14 | Control system | German Siemens PLC and German photoelectric sensors |
| 15 | Loading single cycle time | ≤24 s |
| 16 | Time to dump garbage | ≤35 s |
| 17 | Control method | All-in-one independent operation of the handsplet (standard remote control) |
| 18 | Key component structure | Reinforced with cast steel parts |
| 19 | Shovel and skateboard slider | Highly wear-resistant nylon |
| 20 | .The design of the whole vehicle | Use SW three-dimensional software to simulate |
| 21 | Back-hanging bucket method | Standard configuration: rear-turning barrel type (can hang the national standard 240 plastic barrel or iron barrel or triangle bucket) / optional: fully sealed bucket, swing arm flip |
| 22 | Body color/text | Body color and text painting can be customized according to customer requirements. |
| 22 | Attachment | Profile light, side light, work light |
| Highlights of the car model | ||
| 1 | Larger loading capacity: | Compared with the previous generation, the load capacity of the same volume is increased by 5% per square (more than 7 barrels of 240L trash cans). |
| 2 | Easy fault position: | The force position of the scraper skateboard is generally prone to deformation, resulting in unstable work. The new generation of products developed by our company has been innovative in terms of materials and design, making the performance of the whole vehicle more stable and improving the service life. |
| Three | Working hours: | The loading time of the new generation of compressed garbage trucks produced by our company is within 25 seconds in the idle state, and the loading time is the longest time used by the vehicle, so it is fuel economy, reduces costs, and improves work efficiency. |
| 4 | Wear parts: | The scraper is the largest force on the vehicle, and the slide is the most worn. Our company's slide adopts a high-strength Q710 of more than 8mm, and the middle of the scraper is strengthened separately, which has greater bearing capacity and stronger wear resistance, which greatly increases the service life. |
| 5 | Oil pump: | The oil pump is the main component of the compression vehicle. Our company's new generation of oil pumps is customized for oil pump factory, with stable performance and extremely low failure rate. |
| 6 | Noise: | The new generation of compressed vehicles has added a photoelectric induction device, which can control the travel distance of each action, reduce the metal sound generated during collision and scraping, and effectively improve noise pollution. |
){kind=link}