Vehicle model: CL5261GYY6BWG
Chengli Dongfeng Tianjin Rear Eight Wheel Oil Tank Truck
Chassis configuration: equipped with Tianjin D560KR semi cab, Longqing DDI75E300 horsepower engine, and Fast 9-speed
(9JS135TA) Transmission, wheelbase 4600+1350, aluminum alloy 350L fuel tank, 295/80R22.518PR vacuum tires, 6T front axle, 10T single reduction rear axle, speed ratio 4.44, with original power take-off, original air conditioning, electric glass, central locking, remote key, driving recorder, rear axle inlet air suspension, with remote control adjustment, engine brake+exhaust pipe front, front disc and rear drum, ABS, air brake cut-off, direction assist, clutch assist, engine brake EBS, front collision lane departure, front axle single tire pressure monitoring
Upper configuration: The effective volume of the tank body is 21 cubic meters (gasoline tank, can be inspected for gasoline and diesel tanks) made of Q235 plate, with 5 thick tanks, 5.5 thick heads, and 5 thick partitions. It has a single compartment and two Jialong European standard tank ports on the top of the tank. There is also a new regulation voice alarm submarine valve. The single compartment is equipped with a set of Jialong lower oil loading (unloading valve, oil vapor recovery, anti overflow probe, anti-static reel), a Shandong Shenwei 80-60 special oil pump (can be pumped in and out), a climbing ladder, manual guardrails, toolboxes, rear bumper, and side guardrails made of carbon steel in one go, made according to the new standards. Other manufacturers come standard with tank body inspection reports and provide chassis and vehicle certificates. Invoice from the upper household.
Precautions for refueling trucks:
(1) Check if the rear anti-static traction belt is on the ground and if all equipment is functioning properly.
(2) Insert the pole into the damp ground to prevent static electricity from catching fire.
(3) Check whether the clutch control handle, power take-off control handle, and control valve switch are in the correct position, whether the throttle is turned to the minimum, and whether the ball valve handles are in the correct position.
(4) Check the lubricating oil level in the pump gearbox. If it is insufficient, add gear oil.
(5) When there is no liquid in the oil pump, a guide fluid should be added to the pump body in advance. When using a new car for the first time, it is necessary to add a guide fluid to the pump to prevent damage to the pump body caused by dry running without liquid.
(6) Check whether the discharge pipeline, discharge valve, and conveying pipe are empty and clean, ensuring that all pipelines are suitable for loading and unloading medium items.
(7) If liquid needs to be extracted, the rotating equipment should be kept away from the oil tanker to prevent entanglement. When extracting liquid, the pump should be stopped promptly and the valve should be closed.
(8) In emergency situations, the emergency control valve should be promptly closed and cut off.
[Vehicle technical parameters] |
Product trademark |
Cheng Li card |
Announcement batch |
376 |
product name |
oil-can |
product model |
CL5261GYY6BWG |
gross mass (Kg) |
26000 |
Tank volume (m3) |
21 |
Rated load mass (Kg) |
14000,14065 |
outline dimension (mm) |
9600×2550×3390 |
curb weight (Kg) |
11805 |
Goods Chamber Size (mm) |
×× |
Rated passenger capacity (person) |
|
Quasi-trailer total mass (Kg) |
|
Number of passengers (person) |
2,3 |
Maximum saddle load mass (Kg) |
|
Approach angle / departure angle of (°) |
22/12 |
Front suspension / rear suspension (mm) |
1480/2170 |
axle weight (Kg) |
7000 / 19000 (2-axial group) |
Top vehicle speed (Km/h) |
80 |
remarks |
EBS Model / Manufacturer: EBS 5 / East Branch Noel Commercial Vehicle Braking System (Shiyan) Co., Ltd., VIE EBS / ESC- / Zhejiang Wanan Technology Co., Ltd.; Side rear protection material: Q235B, connection mode: left and right side protection and rear protection are bolted. The ar lower protection section size (mm): 12060, the rear lower protection height (mm): 490; tank size (long shaft short shaft (mm): 680024501600, total tank capacity: 21 m 3, tank effective volume: 20 m 3, maximum density of transport medium: 700 kg / m 3. The engine model and fuel consumption value (L / 100km) are: DDi75E300-60 (37.3). The vehicle is suitable for dangerous goods transportation, transport vehicle type: FL type, front wheel installed with disc brake, steering wheel installed with tire burst emergency protection device, front exhaust pipe, only using chassis radial tire, rear axle is equipped with speed limit device; speed limit device (km/h): 80; equipped with satellite positioning function driving recorder; the model is equipped with direct power supply ETC vehicle device. Select the cab along with the chassis. Select the position of the urea tank and the air filter element. |
[Chassis technical parameters] |
Chassis model |
DFH1260D |
Chassis name |
truck chassis |
brand name |
Dongfeng brand |
manufacturing enterprise |
Dongfeng Commercial Vehicle Co., Ltd |
number of axles |
3 |
Number of tires |
10 |
wheel base (mm) |
4600+1350,5350+1350,4600+1400 |
tyre size |
295/80R22.5 18PR,315/80R22.5 18PR,12R22.5 18PR |
Number of steel plate spring sheets |
3/-,2/-,9/- |
front gauge (mm) |
2030,1905,1928 |
Fuel types |
diesel oil |
rear track (mm) |
1860/1860,1880/1880 |
Emission basis standard |
The GB17691-2018 countries |
engine type |
Engine production enterprise |
displacement (ml) |
power (Kw) |
DDi75E300-60 |
Dongfeng Commercial Vehicle Co., Ltd |
7500 |
220 |
FAQ
1.Q:Are you a factory or a trade company?
A: We are a leading manufacture of pressure vessels,bobtails,trailers, trucks, and skid mounted stations,and spare parts. Welcome to visit us in Suizhou city, the production base of Chinese special purpose vehicles.
2. Q: Where is your factory located?
A: We are located in Suizhou City,Hubei Province,China
3.Q:How can i visit there?
A:Welcome to the factory for inspection. You can fly to Wuhan Tianhe Airport, and our company will arrange a special car to pick you up.
4.Could you customize exactly according to my requirements?
A:Yes. We have professional R&D team, we can produce the product exactly according to your requirements.
5.Q: Do you provide certification that we need?
A:We can provide various certifications associate. Such as BV,DOT, ADR, SASO and so on.
6.Q: what's your payment terms?
A:T/T& L/C are preferred.
7.Q:Do you arrange shipment for the vehicles?
A:Yes,we can arrange shippment based on trade terms.
8. Q:What service can I get from you?
A:We provide lifelong tracking service and one year free warranty for all of our products. Meanwhile we provide free training and technical support to guide you repair your product. If need, we will also send original spare parts free of charge by air.
9.Q:How is the packing?
A:All the packing comply with exporting standard.
10.Q:How long is the lead time?
A:20-25 working days.
For other questiones,we will reply you ASAP after receiving your consult!