New Swing Arm Garbage Truck

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: a Years
• Model NO.: CLW5567TYDF5
• Type: Recycling
• Certification: ISO9000
• Volume: 6001-10000L
• Emission Standard: Euro 4
• Transmission Type: Manual
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: FOTON
• Models: Micro
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 5600× 2000× 2280
• Trademark: CLW
• Origin: China
• HS Code: 8501101000
• Production Capacity: 1000

Product Description

                    Chengliwei brand CLW5180ZBS6 swing arm garbage truck
Model introduction:
The swing arm garbage truck adopts Dongfeng and other chassis equipped with a unified hydraulic lifting assembly, and is shipped through the left and right arms National unified swing arm garbage bin, capable of multiple buckets per vehicle, with self dumping function, achieving safety, stability, and reliable performance. The garbage bin body is divided into different forms of garbage bins configured according to the swing arm type and the pit ground dual-use type. Sealed covers can be installed to prevent leakage and flying pollution, to meet different environmental requirements. Leading domestic technology and enterprise accessories are used, ensuring reliable quality.
Main technical parameters:Chassis configuration:

[Main Technical Parameters]
Product trademark	Cheng Liwei brand	Announcement batch	382
Product name	CLW5180ZBS6 swing arm garbage truck	Product number	FBJ38263303.
Total mass (Kg)	18,000	Tank volume (m3)
Rated Load Mass (Kg)	11250,11185	Dimensions (mm)	7360 x 2500 x 3310
Prepared mass (Kg)	6620	Cargo compartment size (mm)	××
Rated passenger capacity (person)		Total mass of quasi-tow truck (Kg)
The number of passengers in the cab (persons)	2,3	Load mass utilization coefficient
Approach angle/departure angle (°)	.12/19	Front suspension/rear suspension (mm)	1,260 / 2,150
Number of axes	2	Wheelbase (mm)	3,600,3950,4500,4700,
Shaft load (Kg)	6,500/11500.	Maximum speed (Km/h)	105
Other	Only 3950mm wheelbase is selected; the number of passengers in the cab/rated load (person/kg) correspondence is: 2/11250,3/11185;Protective material: Q235B carbon steel, connection method: the left and right side protection are all welded, and the rear protection is replaced by a special device, and the ground height is 450mm; ABS system manufacturer, model: Jiaozuo Berick Control Technology Co., Ltd., J ABS; installed with satellite positioning function Recorder; The Correspondence Between The Engine Model And The Fuel Consumption Value Is (L/100km): B6.2NS6B210/26.3, D4.5NS6B220/26.6, D4.0NS6B195/26.6, YCS04200-68/26.4, CY4 SK761/26.8, B6.2NS6B230/26.1; Special device: swing arm mechanism, mainly used for the collection and transportation of urban sanitation garbage; Optional: fuel tank, battery, urea tank, left and right installation position of gas storage cylinder.
[Technical parameters of chassis]
Chassis model	EQ1185LJ9CDE.	Name of the chassis	Cargo vehicle chassis (Class II)
Trademark name	Dongfeng brand	Manufacturing enterprise	Dongfeng Automobile Co., Ltd.
Dimensions (mm)	8857×2380×2845	Number of tires	6
Approach angle/departure angle (°)	.19/13, 19/17, 16/11, 16/13	Tire specifications	295/80R22.5 18PR,10.00R20
The number of steel plate springs	8/10+7.8/-,7/7+3.6/7+3	Front wheelbase (mm)	1862, 1933, 1949, 1904, 1960
Types of fuel	Diesel oil	Rear wheelbase (mm)	1806,1865
Emission standards	GB17691-2018 Country VI
Engine model	Engine manufacturers	Discharge (ml)	Power (Kw)
CY4SK761. YCS04200-68.	Dongfeng Chaoyang Chaochai Power Co., Ltd. Guangxi Yuchai Machinery Co., Ltd.	4087 4156	145 147

The new Isuzu 1580 white single-row reversible cab, Yunnai D20TCIF1 national six engine, 126 horsepower (93kw), 160MM beam, width on both sides of the beam 740MM, 6-speed gearbox,Big power takerWindow, 6.00R15 tires, oil brake, 24V double camel battery, 1043 rear axle, rotation, ABS, original air conditioner. Electronic instruments, seat belt prompts. Remote emission monitoring terminal.

 

1. Larger loading capacity: The loading capacity of boxes with the same volume is increased per side compared with the previous generation.5 percent (Multi-pack.7Bucket240 LDustbin).
2. Easy to fault position: scraper skateboard under forceThe position is universalIt is easy to deform by force, resulting in unstable work. The new generation of products developed by our company has innovated in terms of materials and design, making the performance of the whole vehicle more stable and improving the service life.
3. Working hours: The new generation of compressed garbage trucks produced by our company is inSlackThe loading time in the fast state is25.Within seconds, the loading time is the longest time used by the vehicle, so it is economical fuel, reduce costs, and improve work efficiency.
4. Wear parts: The scraper is the vehicle with the greatest force, and the slide is the most worn. Our company's slide adopts high strength.Q710.For8mmAbove, the middle of the scraper is strengthened separately, which has greater bearing capacity and wear resistance, which greatly increases the service life.
5. Oil pump: Oil pump is the main component of the compression vehicle. Our company's new generation oil pump is customized for oil pump factory, with stable performance and extremely low failure rate.

6, noise:The new generation of compressed vehicles has added a photoelectric induction device, which can control the travel distance of each action, reduce the metal sound generated during collision and scraping, and effectively improve noise pollution.

Precautions:

1. When operating, irrelevant personnel should be avoided from approaching the vehicle, especially the rear of the vehicle.

 
Two.,Garbage should be evenly put into the filler. Do not concentrate on one side, so that the center of gravity of the vehicle is shifted, or at the mouth of the filler.
Put it too high along the garbage heap,Affect the pressure filling of garbageAnd the garbage is evenly distributed in the garbage can.
Three, Pressure filling homeworkYou should pay attention to observation. If you find large pieces of other garbage (non-household waste) that cannot be compressed, you should stop it in time.
StopWork, continue the work after cleaning, avoid damaging the working device of the vehicle, and it is strictly forbidden to compress construction waste..
Four.,When lifting and dropping the filler during the unloading operation, you should check the safety around you, operate carefully, and do not go on the slope.
Lift the loader, otherwise it is easy to shift the center of gravity back and cause a rollover accident.
5,The filler is not there.Fall and lockBefore, it is not allowed to enter the normal driving.
Our company makes the following commitments to the after-sales service of the vehicle:

After-sales service commitment
1	Technical training program	The supplier is responsible for free training of equipment users at the user's location before handing over the car to the user for use, mainly from the driver's operation of the hydraulic system and special equipment to familiarize himself with the basic principles of the vehicle and the ability to deal with general faults.
2	.After-sales service method	The maintenance of the chassis part can be solved at the chassis manufacturer service station closest to the user's use. For the distribution location, technical strength and contact information, please refer to the chassis Maintenance Manual for details. For the maintenance of the special device part, you can use the contact information of telephone and fax. We will give a processing plan within 2 hours after receiving the user's call, and if necessary, we will send professional maintenance personnel to the place of use within 24-48 hours to solve the problem.
Three	Free maintenance plan	The "three-warrantee" period of the equipment provided by the supplier is one year or 30,000km. During the "three-warrantee" period, the free maintenance of the chassis part is carried out at the Dongfeng Automobile Technical Service Station where the user is located, and the free maintenance of the special device part is carried out by the supplier to send professional and technical personnel.In case of quality failure caused by illegal operation or improper use, accidents, man-made damage, etc., the supplier will provide timely maintenance services, and the maintenance cost shall be borne by the user.
4	Supply and price of accessories after the free maintenance period	After the free maintenance period (after the "three-warrantee" period), if the equipment fails, the accessories need to be replaced. The chassis part can be carried out at the chassis manufacturer's service station, and the special device part is directly supplied by us. The price of accessories is supplied to the user at the cost price, and the maintenance period is lifetime.
5	Agree to do something	If you buy our company's special car, the "three-guarante" period will be implemented for one year or drive 30,000 km, lifelong maintenance, and after-sales service will be in place within 24-48 hours.
6	Service purpose and objectives	Fast, decisive, accurate, thoughtful and thorough; the service quality wins user satisfaction.