Dongfeng 8-ton foam fire truck
(Vehicle model: CLW5160GXFPM60 / DF type foam fire truck)
(Chassis model: EQ1185DJ9CDF)
Technical Specification
- Main technical parameters of the whole vehicle
Overall dimension: 8190 * 2510 * 3340 (mm)
Full load total mass: 16,000 kg
Preparation mass: 9,450 kg
Top speed: 105 km/h
Model: Dongfeng Motor Co., Ltd. / EQ1185DJ9CDF
Engine: Dongfeng Cummins Engine Co. (KJ. 230 HP)
Engine model number: B6.2NS6B230
Power: 169 kW
Drive type: rear-wheel drive
Wheelbase: 4,700 mm
Emission standard: State VI
Structure: flat head, original double row seat four door passenger room.
Seat setting: 2 people in front and 4 people in back.
Install a guardrail and handrail in front of the seat. On the way to the fire fighting and rescue, the firefighters quickly carried the air breathing apparatus. After arriving at the fire site, they quickly entered the fire fighting and rescue operations.
Cab structure: Install a hydraulic tipping mechanism suitable for tipping.
Equipment in the cab: in addition to the original car air conditioning, ABS, direction power and other equipment, install force device control switch, 100W alarm, alarm switch, etc.
Outside the cab: a long row alarm light is installed on the front of the top of the cab.
Capacity: water: 5000 Kg Foam: 3000 Kg
Material: water tank: high-quality steel plate, treated with high-tech anti-corrosion treatment
Foam tank: high quality 304 # stainless steel
Structure: frame welding, vertical and horizontal anti-swing plate in the tank to reduce the impact of the water on the tank during the running of the vehicle, so that the tank has sufficient strength and stiffness.
The roof of the tank is equipped with a fast open manhole to facilitate the access of maintenance personnel. The tank is equipped with a device and filter to prevent the pump from absorbing water and forming a vortex and affecting the flow.
The tank is provided with a stainless steel floating ball level indicator, which can display the capacity on the instrument panel; the bottom is provided with a discharge outlet with a ball valve.
The tank is equipped with two 76mm overflow pipes, and one 76mm injection port on each side of the compartment to facilitate water supply for other vehicles.
Equipment: 2 population holes, with quick locking and opening device.
2 liquid level indicators.
2 sewage outlets, with stainless steel ball valve.
2 water injection ports (one for left and right)
Process: welding is firm and reliable, remove defects such as slag and deficiency welding; do 24-hour hydrostatic test after welding to ensure no leakage.
- Fire pump and piping system
Fire pump: CB10 / 40 low-pressure fire pump
Flow rate: 40 L/s
Pressure: 1.0MP a
Installation type: rear position
Vacuum pump: piston type;
Vacuum pump material: wear resistance, corrosion resistance to meet the sealing requirements;
Water diversion time is 35s, and the suction depth is 7m.
Maximum vacuum degree: 85 kPa;
pipe system
Water suction line: the pump is equipped with Φ125 mm water inlet, can absorb water from natural water source, liquid tank, fire reservoir, and can be added to connect the fire hydrant water supply, water suction pipe placed on the roof.1 water inlet with Φ125 mm butterfly valve for connection to the water tank.
Water outlet road:
The roof is equipped with 1 Φ 89mm water outlet fire gun pipe and control valve, using flexible joint;
One water outlet controlled by the Φ80 mm manual ball valve is set on the left and right sides of the pump room.
Water injection pipeline: 1 Φ65 mm pump water injection pipeline and control valve into the tank;
There are 1 Φ65 mm water injection pipe on the left and right sides of the car, which can inject water into the tank. The interface is an internal buckle interface and equipped with a stuffy cover.
Waste water pipe: in order to protect the water pump and each ball valve, the waste water pipe is installed in the pipeline, and respectively equipped with ball valves.
Foam ratio mixer: ring pump type, 3%~6%
Cooling water pipeline: in order to make the force collector cope with various complex situations, it is equipped with a cooling water pipeline and control valve connected with the inlet and outlet water pipe.
Model: PL 32 type fire gun
Flow rate: 40 (1 / s)
Range: water 55 m foam 50m
Pressure: 1.0M P a
Location: Located on the top of the water tank.
Control: adopt manual control with locking mechanism for easy operation.
Type: full-power sandwich force collector
Cooling mode: forced water cooling type
Lubrication mode: splash-type oil lubrication
Operation mode: the force collector is operated at the instrument panel in the cab, which is convenient and smooth.
Installation: the force collector is well matched with the engine, accurately installed, and there is no falling off after combination.
- Equipment box and pump room
Main material:
The skeleton and skin are high quality carbon steel; the internal rack is made of aluminum alloy profile and the interior panel is oxidized aluminum plate.
fundamental structure:
1, for the overall structure, the front for the equipment box, the back for the pump room.
2. The rear is a pump room, equipped with instrument panel and operating system, equipment box and pump room are equipped with locked curtain door. Frame solds the structure and ensures its strength and stiffness.
3, the space can be adjusted at will, and the equipment box is equipped with drainage holes.
4, the equipment box is reliable, beautiful, can be adjusted at will, nine large space curtain door equipment box, to ensure the full use of the space.
5. The carriage and pump room are equipped with lights to meet the lighting needs of fire fighting at night.
Aluminum alloy rolling shutter door:
1, all equipment box and pump room are used with lock shutter door, handle and lock pin durable, no deformation, sealing performance after water shower experiment, to ensure no leakage phenomenon.
2. There are rivets in the slide on both sides of the shutter door so as to avoid falling off.
3. There are lights in each equipment box, which is controlled by the opening and closing of the rolling shutter door.
4, left, right each two aluminum alloy curtain door, a rear tail, safe and reliable, beautiful and practical.
fundamental principle:
(1) Integration of design equipment according to combat composition and combat operation;
(2) Design various equipment brackets according to the ergonomic principle;
(3) No need for any climbing tools, take any of the equipment in the box.
(4) Place the equipment according to the logical relationship and frequency of use;
(5) Stand on the ground or on the pedal in the 1-2 action to take any equipment.
Eight, electrical system
1. The top of the cab is equipped with a red long row of luxury alarm lights.
2. The power of the alarm is 100W;
3. In order to ensure the safety of the use, the whole vehicle line is made of the overall wiring harness, and the waterproof plug is used at the connection point to ensure the safety of the line in the process of use.
4. The roof is equipped with 1 fire lighting lamp; the safety sign lights under the two sides of the vehicle, and the body and tail paste reflective signs according to the standard.
5. All equipment boxes are installed with LED lights to facilitate night combat lighting.
6. There are three flashing lights on the upper side of the vehicle, safety sign lights and side response reflector (combination) are installed on the lower side, equipped with front and rear profile lights, and one turn signal on each side, and there are lights in the passenger room, equipment box and pump room.
7, alarms, alarm lights, strobe lights, circuits are independent additional circuits, control devices are installed in the cab.
8. All lines are protected by casing, and different colors are used to distinguish the connection form and function.
9. Equipment on the instrument panel in the pump room: liquid level gauge, tachometer, pressure gauge, vacuum gauge, equipment box lighting switch, etc.
IX. Instrument panel and on-board equipment
1. The instrument panel is located in the pump room at the rear end of the car, with a control board and sufficient lighting;
2, all control handles, switches, indicator lights near the Chinese logo;
3, there are operation steps description.
4. All signs are persistent and high attachment, and can withstand the effects of temperature and climate.
5, the operation panel uses high quality aluminum plate, beautiful, durable, the overall weight is light.
6. The operating system of the pump room is set at the rear of the vehicle, without pressure outlet, to ensure the safety of the operator, and there are panel lights.
X. Overall technical requirements
1. The vehicle performance meets the provisions of GB7956 "Fire Engine Performance Requirements and Test Methods".
2, the appearance of the vehicle to maintain a certain flatness, and comply with the relevant regulations.
3, all riveting to maintain a certain density, in line with the provisions of the enterprise standard.
4. All the welding is firm, smooth and smooth, and it is in line with the provisions of the enterprise standard.
5. All operating switches, instruments, equipment racks and vehicles shall have nameplate signs conforming to the specification.
Xi. Vehicle documents
1) Chassis use instruction manual 2) Chassis quality warranty card
: 3) Chassis maintenance manual: 4) Chassis qualification certificate
5) List of vehicle tools 6) Engine number rubbings
7) Chassis number rubbing; 8) Fire engine operation manual
9) List of fire engine fire-fighting equipment 10) Fire engine certificate
11) Fire truck tracking service card 12) Fire protection exchange list
Equipment equipped with table
order number |
name |
unit |
quantity |
remarks |
1 |
fire hose |
tray |
8 |
Type 13 Φ65 mm 4 disk Type 13 Φ80 mm2 disk |
2 |
Water injection water belt |
rice |
1 |
Type 13,65 inner buckle |
3 |
DC water gun |
branch |
1 |
|
4 |
Flower water gun |
branch |
1 |
|
5 |
Foam spray gun |
branch |
1 |
PQ8 |
6 |
dry-chemical fire extinguisher |
With |
1 |
3 kg, ABC dry powder |
7 |
Water collector |
piece |
1 |
|
8 |
Divisional water |
piece |
1 |
|
9 |
Water suction tube wrench |
individual |
2 |
|
10 |
rubber hammer |
individual |
1 |
|
11 |
Ground fire hydrant wrench |
piece |
1 |
|
12 |
Underground fire hydrant wrench |
piece |
1 |
|
13 |
The belt bridge |
individual |
2 |
|
14 |
Water belt wrapped cloth |
piece |
4 |
|
15 |
Water belt hook |
piece |
4 |
|
16 |
a firemans axe |
piece |
1 |
|
17 |
Fire suction pipe |
rice |
8 |
|
18 |
Water suction pipe filter |
single |
1 |
One suction pipe per 8 m |
19 |
Different diameter interface |
single |
2 |
Bubuckle Φ 65 variable Φ 80 |
1:What payment methods do you support? - We support T/T and LC and other ways you need.
2:What is your minimum order quantity? - One unit.
3. How about the delivery time? - Generally it will takes 10 to 30 days after receiving your deposit. The sactual date will be depended on your order and item. We will contact you if we confirm the delivery date. And we will track the goods all the time until the goods reach to the destination.
4.How can I confirm whether your products will meet my needs? -You can tell us your needs such as size, material, volume, height and other information, our professional sales will provide solutions.
5. How do you pack the products? - Standard shipping packaging.
6. How about the price? - To provide the top quality product with competitive price is our mission all the time. We want a long-term business relatonship with our customers rather than cooperate for once.
7. How can I trust you? - We have 15 years of experience in the trailer manufacturing field; and we have our own factory. - We have supplied for many famous company at home and abroad; - We want to provide great service for you rather than just provide a price and product for you; - To meet you is the first step, then we would like to make friends and maintain the business relationship with you all the time.