Chassis configuration: Liberation Qingdao front and rear four Dragon V Qingdao chassis, Dragon V2.0, 6X2 chassis, Dragon V2.0 semi high roof fully floating cab (with air conditioning/electric lifting/electric doors and windows), Xichai CA6DLD-22E6, (260 horsepower engine), Shaanxi Gear 8JS85E gearbox, 435 upgraded punch welded axle (speed ratio 4.444/wedge brake), 280 * 80 * (8+5) frame, F4N front axle (disc brake), wheelbase 1900+4000mm, special chassis for hazardous chemical tank vehicles, air spring seats, central locking, cruise control system, front axle tire burst emergency safety device, front axle with tire pressure monitoring, exhaust spark arrester, exhaust tailpipe Front mounted, equipped with engine cylinder brake, leaf spring 3/3/2+2 airbags. Equipped with domestically produced ECAS, front axle stabilizer bar, 200L aluminum fuel tank, ETV valve, U-shaped rear processor, aluminum alloy air storage cylinder, polymorphic switch, 150Ah battery, with electrostatic drag belt chassis bridge oil change, 6/6/50000 kilometers, PKC wiring harness, speed limit of 79KM/H for EBS/ESC/FCW/LDWS.
Upper configuration: The effective volume of the tank body is 20.5 cubic meters (for diesel and gasoline tanks). It is made of 5182 aluminum alloy sheet, with 6 thick tanks, 6 thick heads, and 6 thick partitions. It has a single compartment and two Jialong aluminum alloy European standard tank ports on the top of the tank. There is also a new intelligent Jialong aluminum alloy submarine valve that can be closed. The tank body is equipped with a set of Jialong lower loading oil (unloading valve, oil vapor recovery, anti overflow probe, anti-static reel), a Shandong Shenwei 80-60 special oil pump (can be pumped in and out), a climbing ladder, manual guardrails, toolboxes, rear bumper, and side guardrails. The aluminum alloy is formed in one go according to the new standards. Other manufacturers come standard with tank body inspection reports, chassis certificates, and the whole vehicle. Certificate, invoice for household registration.
| [Vehicle technical parameters] |
| Product trademark |
Cheng Li card |
Announcement batch |
350 |
| product name |
Aluminum alloy oil truck |
product model |
CL5260GYYLC6 |
| gross mass (Kg) |
25500 |
Tank volume (m3) |
21.4 |
| Rated load mass (Kg) |
17200,17265 |
outline dimension (mm) |
9020×2500×3500 |
| curb weight (Kg) |
8105 |
Goods Chamber Size (mm) |
×× |
| Rated passenger capacity (person) |
|
Quasi-trailer total mass (Kg) |
|
| Number of passengers (person) |
3,2 |
Maximum saddle load mass (Kg) |
|
| Approach angle / departure angle of (°) |
21/15 |
Front suspension / rear suspension (mm) |
1332/1788 |
| axle weight (Kg) |
7000/7000/11500 |
Top vehicle speed (Km/h) |
80 |
| remarks |
EBS model / manufacturer: EBS 5 / Knol Brake System (Dalian) Co., Ltd.; speed limit device; speed limit device (km/h): 80; driving recorder with satellite positioning function; engine / fuel consumption value (L / 100km); CA6DLD-22E6 (37.45). Protective material: aluminum alloy, connection mode: left and right side protection and rear lower protection are bolted. Back protection section size (mm): 12060, and the rear protection height from the ground (mm): 480; the maximum density of quasi-transport medium: 840 kg / m 3. Total capacity of the tank: 21.4 cubic meters, effective volume of the tank: 20.4 cubic meters. Tank external dimensions (long long shaft short shaft (mm): 630024501750; dangerous goods transport vehicle type: FL type; other instructions: The vehicle is suitable for transportation of dangerous goods. Only the chassis of radial tire chassis, the front wheel installed disc brake, front exhaust pipe, steering wheel installation tire burst emergency protection device, the rear axle of the car is air suspension, with the chassis of the cab. The corresponding relationship of vehicle length / wheelbase / front suspension / rear suspension is (mm): 9020 / 1900 + 4000 / 1332 / 1788 optional ETC vehicle device for this model. Select the cab along with the chassis. |
| [Chassis technical parameters] |
| Chassis model |
CA1260PK2L5T3BE6A81 |
Chassis name |
Flat-head diesel truck chassis |
| brand name |
Liberation card |
manufacturing enterprise |
China FaW Group Co., Ltd |
| number of axles |
3 |
Number of tires |
8 |
| wheel base (mm) |
1900+4000,1900+4700 |
| tyre size |
295/80R22.5 18PR |
| Number of steel plate spring sheets |
12/12/2+-,3/3/2+- |
front gauge (mm) |
1922/1922,1950/1950,1946/1946,1965/1965,1987/1987 |
| Fuel types |
diesel oil |
rear track (mm) |
1878 |
| Emission basis standard |
The GB17691-2018 countries |
| engine type |
Engine production enterprise |
displacement (ml) |
power (Kw) |
| CA6DLD-22E6 |
China FaW Group Co., Ltd |
6600 |
164 |
Precautions for refueling trucks:
(1) Check if the rear anti-static traction belt is on the ground and if all equipment is functioning properly.
(2) Insert the pole into the damp ground to prevent static electricity from catching fire.
(3) Check whether the clutch control handle, power take-off control handle, and control valve switch are in the correct position, whether the throttle is turned to the minimum, and whether the ball valve handles are in the correct position.
(4) Check the lubricating oil level in the pump gearbox. If it is insufficient, add gear oil.
(5) When there is no liquid in the oil pump, a guide fluid should be added to the pump body in advance. When using a new car for the first time, it is necessary to add a guide fluid to the pump to prevent damage to the pump body caused by dry running without liquid.
(6) Check whether the discharge pipeline, discharge valve, and conveying pipe are empty and clean, ensuring that all pipelines are suitable for loading and unloading medium items.
(7) If liquid needs to be extracted, the rotating equipment should be kept away from the oil tanker to prevent entanglement. When extracting liquid, the pump should be stopped promptly and the valve should be closed.
(8) In emergency situations, the emergency control valve should be promptly closed and cut off.
basic operation
1. Oil tankers should be equipped with dedicated fire extinguishers and installed with traction chains and power poles. When driving, the traction chain should make contact with the ground; When refueling or draining, the power pole must be inserted into damp ground.
2. The fuel tank filling hole should be tightly sealed, the oil drain valve and oil drain pipe should be leak free, the fuel tank vent hole should be unobstructed, the oil pump inlet filter screen should be cleaned regularly, and the oil hose should be immediately fitted with joint covers at both ends after use to prevent dirt from entering.
3. The carburetor and exhaust pipe of the internal combustion engine shall not have backfire phenomenon, and the exhaust pipe shall be installed in front of the vehicle.
4. Oil tanker operators are not allowed to wear shoes with nails, smoking near oil tanks is strictly prohibited, and ignition is strictly prohibited.
5. When parking, keep away from sources of fire, and choose a cool place to park during hot seasons. During thunderstorms, do not park under large trees or high-voltage lines. When stopping midway, there should be a dedicated person to supervise.
6. During the maintenance process, if the operator needs to enter the oil tank, it is strictly prohibited to carry fire and reliable safety protection measures must be taken. There must be a dedicated person outside the tank for supervision.
7. All electrical equipment in the car must be well insulated and sparks are strictly prohibited. The working lighting in the car should be safety lights below 36V.
8. When the sedimentation tank of the fuel tank freezes, it is strictly prohibited to use hot water or steam to bake, or drive the car into a warm room to thaw.
9. When performing maintenance and repairs under the vehicle, the internal combustion engine should be turned off, the handbrake should be tightened, and the wheels should be tightened.
10. When a vehicle needs to be inspected after repair, it should be driven by qualified personnel and no passengers or cargo are allowed on board. When road inspection is required, the inspection certificate issued by the traffic management department should be displayed.
11. When parking on a slope, use reverse gear for downhill parking and first gear for uphill parking, and plug the tires with triangular wedges.
Purchase Guide
1 * * Please send us your inquiry;
2 * *We will reply to your quotation within 12 hours;
3 * *We will negotiate the configuration you require;
4 * * Confirm technical data → Sign contract (P/I) → 30% deposit (or issue letter of credit) → Production;
5 * * Manufacturing process update message → Production completed;
6 * * balance payment → factory delivery → shipment → customs clearance → A/S service for 1 year.
Service Commitment
1.24-hour hotline is at your service and can provide quality and extended services.
2. We can provide lifelong free technical guidance services.
3. For customers who purchase bulk quantities for the first time, we can dispatch service technicians to provide on-site guidance services and short-term on-site services.
4. Free technical training can be provided to help customers quickly and correctly use and maintain trucks and trailers.
Our advantages
--What are our advantages?
**Competitive prices - We are a leading distributor for major truck, semi-trailer, and construction machinery manufacturers/factories in China, enjoying the best dealer prices every year. From comparison and customer feedback, our prices are more competitive than other manufacturers/factories.
**Quick response - Our team is composed of a group of diligent and enterprising people. Work 24/7 and respond to customer inquiries and questions at any time. Most problems can be solved within 12 hours.
**Fast delivery - Manufacturers/factories usually take over 30 days to produce the ordered machines, and we have various resources locally and nationally to receive the machines in a timely manner.
--WOur advantages
--What are our advantages?
**Competitive prices - We are a leading distributor for major truck, semi-trailer, and construction machinery manufacturers/factories in China, enjoying the best dealer prices every year. From comparison and customer feedback, our prices are more competitive than other manufacturers/factories.
**Quick response - Our team is composed of a group of diligent and enterprising people. Work 24/7 and respond to customer inquiries and questions at any time. Most problems can be solved within 12 hours.
**Fast delivery - Manufacturers/factories usually take over 30 days to produce the ordered machines, and we have various resources locally and nationally to receive the machines in a timely manner.
--What payment terms can we accept?
Usually we can use wire transfer or letter of credit for payment.
**When making wire transfer payments, a 30% down payment is required, and the remaining 70% should be settled before shipment or with a copy of the original bill of lading from an existing customer.
**When making payment through a letter of credit, a 100% irrevocable letter of credit with no "soft terms" is acceptable. Please consult with your personal sales manager who works with you--
How long is the validity period of our price?
We are a gentle and friendly supplier, never seeking excessive profits. Basically, our prices remain stable throughout the year, and we only adjust prices based on two situations:
**The exchange rate between the US dollar and the Chinese yuan varies greatly depending on international currency exchange rates.
**Due to rising labor and raw material costs, manufacturers/factories have adjusted truck and machinery prices--
What logistics methods can we use for transportation?
We can transport trucks, trailers, and machinery through various modes of transportation.
**90% of the goods will be shipped by sea to all major continents, such as South America, the Middle East, Africa, Oceania, and Europe, through container or roll on/roll off/bulk transportation.
**For China's neighboring countries such as Russia, Mongolia, Kazakhstan, Uzbekistan, etc., we can transport trucks, trailers, and machinery by road or rail.
**For urgently needed lightweight spare parts, we can ship them through international express delivery services. For example, DHL, UPS, TNT, or Fedex.hat payment terms can we accept?
Usually we can use wire transfer or letter of credit for payment.
**When making wire transfer payments, a 30% down payment is required, and the remaining 70% should be settled before shipment or with a copy of the original bill of lading from an existing customer.
**When making payment through a letter of credit, a 100% irrevocable letter of credit with no "soft terms" is acceptable. Please consult with your personal sales manager who works with you--
How long is the validity period of our price?
We are a gentle and friendly supplier, never seeking excessive profits. Basically, our prices remain stable throughout the year, and we only adjust prices based on two situations:
**The exchange rate between the US dollar and the Chinese yuan varies greatly depending on international currency exchange rates.
**Due to rising labor and raw material costs, manufacturers/factories have adjusted truck and machinery prices--
What logistics methods can we use for transportation?
We can transport trucks, trailers, and machinery through various modes of transportation.
**90% of the goods will be shipped by sea to all major continents, such as South America, the Middle East, Africa, Oceania, and Europe, through container or roll on/roll off/bulk transportation.
**For China's neighboring countries such as Russia, Mongolia, Kazakhstan, Uzbekistan, etc., we can transport trucks, trailers, and machinery by road or rail.
**For urgently needed lightweight spare parts, we can ship them through international express delivery services. For example, DHL, UPS, TNT, or Fedex.
Audited Supplier 
Chassis configuration: Liberation Qingdao front and rear four Dragon V Qingdao chassis, Dragon V2.0, 6X2 chassis, Dragon V2.0 semi high roof fully floating cab (with air conditioning/electric lifting/electric doors and windows), Xichai CA6DLD-22E6, (260 horsepower engine), Shaanxi Gear 8JS85E gearbox, 435 upgraded punch welded axle (speed ratio 4.444/wedge brake), 280 * 80 * (8+5) frame, F4N front axle (disc brake), wheelbase 1900+4000mm, special chassis for hazardous chemical tank vehicles, air spring seats, central locking, cruise control system, front axle tire burst emergency safety device, front axle with tire pressure monitoring, exhaust spark arrester, exhaust tailpipe Front mounted, equipped with engine cylinder brake, leaf spring 3/3/2+2 airbags. Equipped with domestically produced ECAS, front axle stabilizer bar, 200L aluminum fuel tank, ETV valve, U-shaped rear processor, aluminum alloy air storage cylinder, polymorphic switch, 150Ah battery, with electrostatic drag belt chassis bridge oil change, 6/6/50000 kilometers, PKC wiring harness, speed limit of 79KM/H for EBS/ESC/FCW/LDWS.
){kind=link}