| [Technical parameters of the whole vehicle] |
| Product trademark |
Cheng Liwei brand |
Announcement Batch |
358 |
| Product Name |
Foam fire truck |
Product model |
CLW5370GXFPM180 |
| Total mass (Kg) |
37300 |
Tank volume (m3) |
18.1 |
| Rated load mass (Kg) |
18100 |
Overall dimensions (mm) |
11710×2550×3560 |
| Kerb weight (Kg) |
18750 |
Cargo compartment size (mm) |
×× |
| Rated passenger capacity |
|
Total mass of quasi-trailer (Kg) |
|
| Number of passengers allowed in the cab (person) |
2+4 |
Maximum load mass of saddle (Kg) |
|
| Approach angle/departure angle (°) |
18/9 |
Front overhang/rear overhang (mm) |
1500/2510 |
| Axle Load (Kg) |
6200/6500/12300/12300 |
Maximum vehicle speed (Km/h) |
85 |
| Remark |
The total volume of the tank is 18.1 cubic meters, the volume of the water tank is 12.6 cubic meters, the size of the water tank is 3460 × 2475 × 1540 mm, the volume of the foam liquid tank is 5.5 cubic meters, the foam liquid tank is a special-shaped tank, the front end size of the foam liquid tank: 1480 × 1190 × 1540 mm, the rear end size of the foam liquid tank: 800 × 2475 × 1540 mm. Integral side protection structure, rear protection device material: Q235A, cross-sectional size: 100 × 150 mm, connection method with vehicle: bolt connection, rear protection height from the ground: 395mm. The EBS manufacturer is WABCO, and the model is EBS4 +. The main special devices include fire pumps and fire cannons. |
| [Other parameters of the whole vehicle] |
| Chassis model |
Arocs |
Chassis Name |
|
| Trademark Name |
|
Manufacturing enterprise |
|
| Number of axes |
4 |
Number of tires |
12 |
| Wheelbase (mm) |
1750+4600+1350 |
| Tyre specifications |
315/80 R22. 5 |
| Number of leaf springs |
3/3/4 |
Front track (mm) |
2058/2058 |
| Type of fuel |
|
Rear track (mm) |
1804/1804 |
| Emission basis standards |
|
| Engine model |
Engine manufacturer |
Displacement (ml) |
Power (Kw) |
OM473LA.6-55
|
Daimler Trucks AG
|
15569
|
426
|
2. Cab
Knot Structure: Flat-head, original double-row four-door passenger compartment. Seating Settings: 2 in front and 4 in rear.
Guardrails and armrests are installed in front of the seats. Firefighters quickly carried air respirators on their way to fire fighting and rescue. After arriving at the fire, they quickly put into fire fighting and rescue operations.
Cab structure: Install hydraulic rollover mechanism adapted to tipping.
Equipment in the cab: In addition to the original vehicle equipment, power take-off control switch, 100W alarm, warning light switch, etc. are installed.
Exterior of the cab: A long row of warning lights is installed at the front of the cab.
3. Content Can
Capacity Amount: Water: 20900Kg Foam: 3824 kg
Material Quality: Water tank: high-quality steel plate, treated with high-tech anti-corrosion
Foam tank: 304 stainless steel plate, treated with high-tech anti-corrosion
Knot Structure: the frame is welded, and longitudinal and transverse anti-swing plates are arranged in the tank body to reduce the impact of water in the tank on the tank body during the vehicle running; The front and rear wall plates of the tank body are folded with trapezoidal folding ribs, so that the tank body has sufficient strength and rigidity.
The roof of the tank is equipped with a fast open manhole to facilitate the access of maintenance personnel. The tank is equipped with a device and a filter screen to prevent the pump from absorbing water and forming a vortex, thus affecting the flow rate.
The tank is equipped with a stainless steel floating ball level indicator, which can show the capacity of the fire extinguishing agent in the tank through the level table on the instrument panel; the sewage outlet with ball valve at the bottom of the tank has two 76mm overflow pipes and two 76mm injection ports on each side of the car for other vehicles.
set up Preparation: 2 population holes, with quick locking and opening device.
2 liquid level indicators.
2 sewage outlets, with stainless steel ball valve.
4 water injection outlets (left and right)
Process: conduct firm and reliable welding, remove defects such as slag clamp and deficiency welding; conduct 24-hour hydrostatic test after welding to ensure no leakage.
4. Fire pump and piping system
Fire pump: CB10 / 100 low pressure fire pump (Shanghai shen) flow Quantity: 100 L/s
press Force: 1.0MPa
Installation type: rear vacuum pump: piston type;
Vacuum pump material: wear resistance, corrosion resistance to meet the sealing requirements;
Water diversion time is 35s, and the suction depth is 7m. Maximum vacuum degree: 85 kPa;
pipe system
Water suction line: the pump is equipped with Φ150mm water inlet, which can absorb water from natural water source, liquid tank, fire reservoir, and can be added to connect the fire hydrant water supply, water suction pipe is placed on the roof.1 water inlet with Φ150mm butterfly valve for connection to the water tank.
Water outlet road:
The roof is equipped with a Φ100mm water outlet fire gun pipe and control valve, using a flexible joint;
1 Φ80mm and 1 Φ65mm manual ball valve controlled outlet are provided on the left and right sides of the pump room. Water injection pipeline: 1 Φ65mm pump water injection pipeline and control valve into the tank;
There are two Φ65mm water injection pipes on the left and right sides of the car, which can inject water into the tank. The interface is a buckled interface and equipped with a stuffy cover.
Waste water pipe: in order to protect the water pump and each ball valve, the waste water pipe is installed in the pipeline, and respectively
Equipped with ball valve.
Cooling water pipe: in order to make the force collector cope with various complex situations, it is equipped with a cooling water pipe and control valve connected with the inlet and outlet water pipe.
5. fire monitor
mould PL 8 / 80 fire gun (West) flow Quantity: 80 (1 / s)
shoot Cheng: The water is 70m Foam at 65m pressure Force: 1.0MPa
Position Set: on top of the water tank.
accuse System: use manual control, with locking mechanism, convenient operation.
Six, force collector
mould Type: Full power sandwich power take-off Cooling method: Forced water cooling
Lubrication method: splash oil lubrication
Operation mode: The power take-off is hung on the instrument panel in the cab. The combination of the power take-off is convenient and stable, and there is no abnormal noise. Ann Installation: The power take-off is well matched with the engine, accurately installed, and there is no self-falling phenomenon after combination.
7. Pump room
Main materials:
The skeleton and skin are made of high-quality carbon steel; The interior panel is oxidized aluminum panel. Basic structure:
1. It is an overall structure, with a water tank at the front and a pump room at the rear.
2. The rear is the pump room, equipped with an instrument panel and operating system. The pump room is equipped with a locking rolling door. The frame welds the structure and ensures its strength and rigidity.
3. The pump room is equipped with lighting lamps to meet the lighting needs during night fire fighting operations. Aluminum alloy rolling shutter door:
1. The pump room adopts a locking rolling door. The handle and locking pin are strong and durable and do not deform. The sealing performance has been tested with water shower to ensure no leakage.
2. There are rivets in the slideways on both sides of the rolling shutter door to prevent it from falling off.
3. There are lighting lights in each equipment compartment, which are controlled by the opening and closing of the rolling shutter door.
4. There are aluminum alloy curtain doors on the left and right of the rear, and one at the rear, which are safe, reliable, beautiful and practical. Basic principles:
(1) Design equipment integration according to combat composition and combat development;
(2) Design various equipment brackets according to ergonomic principles;
(3) The principle of simplicity and practicality in accessing any equipment in the box without any climbing tools.
(4) Place equipment according to the logical relationship and frequency of use;
(5) Stand on the ground or pedal and use any equipment within 1-2 movements.
8. Electrical system
1. The top of the cab is equipped with a long row of red luxury lights.
2. The alarm power is 100W;
3. In order to ensure the safety of use, the whole vehicle circuit is made of an integral wiring harness, and waterproof plugs are used at the connections to ensure the safety of the circuit during use.
4. The roof is equipped with a fire lighting lamp; There are safety sign lights under both sides of the vehicle, and reflective signs are pasted on the body and tail according to standards.
5. All equipment boxes are equipped with LED lighting to facilitate night combat lighting.
6. Each side of the vehicle is equipped with four stroboscope lights and side lighting lights (combined type) at the top, safety sign lights and side retroreflectors (combined type) at the bottom, with front and rear position lights, and one turn signal on each side. There are lighting lights in the passenger room, equipment box and pump room.
7. The alarm, warning light, stroboscopic light and circuit are independent additional circuits, and the control device is installed in the cab.
8. All lines are protected by sleeves, and different colors are used to distinguish the line connection forms and functions.
9. Equipment on the instrument panel in the pump room: liquid level gauge, tachometer, pressure gauge, vacuum gauge, equipment box lighting switch, etc.
9. Instrument panel and on-board equipment
1. The instrument panel is located in the pump room at the rear of the car, with a control panel and sufficient lighting;
2. There are Chinese signs near all control handles, switches and indicator lights;
3. There are operating steps.
4. All signs are durable and highly adhesive, and can withstand the effects caused by drastic changes in temperature and climate.
5. The operation panel is made of high-quality aluminum plate, which is beautiful, durable and light in overall weight.
6. The pump room operating system is set at the rear of the vehicle, with no pressure outlet to ensure the safety of operators, and panel lighting.
10. Overall technical requirements
1. The performance of the whole vehicle complies with the provisions of GB7956 "Fire Truck Performance Requirements and Test Methods".
2. The appearance of the whole vehicle maintains a certain degree of flatness and complies with relevant regulations.
3. All riveting should maintain a certain density and comply with the requirements of enterprise standards.
4. All welding is firm, smooth and smooth, and complies with the requirements of enterprise standards.
5. All operating switches, instruments, equipment racks and vehicles have nameplate marks that meet the specifications.
11. On-board documents
1) Chassis instruction manual 2) Chassis quality warranty card
3) Chassis service manual 4) Chassis certificate
5) On-board tool list 6) Engine number rubbing
7) Chassis number rubbing parts 8) Fire truck instruction manual
9) List of fire fighting equipment for fire trucks 10) Fire truck certificate
11) Fire truck tracking service card 12) Fire Exchange Checklist
Equipment allocation table
Sequence
Number |
Name |
Unit |
Quantity |
Remark |
| 1 |
Fire hose |
Disk |
10 |
13-Φ 65-20 6 plates
13-Φ 80-20 4 plates |
| 2 |
Suction pipe |
Meters |
8 |
|
| 3 |
Water filter |
Piece |
1 |
|
| 4 |
Water collector |
Piece |
1 |
|
| 5 |
Three-point water |
Piece |
1 |
|
| 6 |
Suction pipe wrench |
1 |
2 |
|
| 7 |
Ground hydrant wrench |
Piece |
1 |
|
| 8 |
Underground fire hydrant wrench |
Piece |
1 |
|
| 9 |
Guard bridge |
1 |
2 |
|
| 10 |
Hose wrapping cloth |
Piece |
4 |
|
| 11 |
Hose hook |
Piece |
4 |
|
| 12 |
Fire axe |
Piece |
1 |
|
| 13 |
Iron collar |
Piece |
1 |
|
| 14 |
Shovel |
Piece |
1 |
|
| 15 |
T-shaped pickax |
Piece |
1 |
|
| 16 |
Waist axe |
Piece |
1 |
|
| 17 |
Reducing interface |
Only |
2 |
Inner buckle Φ65 to Φ80 |
| 18 |
Special-shaped reducing interface |
Only |
1 |
150/100 |
| 19 |
Switch DC water gun |
Branch |
1 |
|
| 20 |
Flowering water gun |
Branch |
1 |
|
| 21 |
Dry powder fire extinguisher |
Tool |
1 |
3 kg, ABC dry powder |
| 22 |
Foam gun |
Branch |
1 |
PQ8 |
| 23 |
Foam pipette |
Branch |
1 |
|
Sinotruk Howowo 25 ton foam fire truck
(Vehicle model: CLW5420GXFPM250 / HW Foam fire truck)
(Chassis model: ZZ5447TXFV466MF5)
Technical Specification
First, the bottom tray
mould Sinotruk Jinan Truck Co., Ltd. / ZZ5447TXFV466MF5
Engine: China Heavy Duty Vehicle Group Co., Ltd. Model: MC11.46-61
Power: 338kW
Drive type: rear-wheel drive
axle Distance: 1950 + 4600 + 1400mm
Emission standard: GB3847-2005, GB17691-2018 country 6
2. pilothouse
bear Structure: flat head, original double row seat four door passenger room. Seat setting: 2 people in front and 4 people in back.
Install a guardrail and handrail in front of the seat. On the way to the fire fighting and rescue, the firefighters quickly carried the air breathing apparatus. After arriving at the fire site, they quickly entered the fire fighting and rescue operations.
Cab structure: Install a suitable hydraulic tipping mechanism.
Equipment in the cab: except for the original vehicle equipment, install the force device control switch, 100W alarm, alarm light switch, etc.
Outside the cab: a long row alarm light is installed on the front of the top of the cab.
Three, let jar
hold Quantity: water: 20,900 Kg Foam: 3,824 kg
timber Quality: water tank: high-quality steel plate, through high-tech anti-corrosion treatment
Foam tank: 304 stainless steel plate, with high-tech anticorrosion treatment
bear Structure: frame welding, vertical and horizontal anti-swing plate in the tank to reduce the impact of the water on the tank; the front and rear walls of the tank are broken with trapezoidal bars, so that the tank has sufficient strength and stiffness.
The roof of the tank is equipped with a fast open manhole to facilitate the access of maintenance personnel. The tank is equipped with a device and a filter screen to prevent the pump from absorbing water and forming a vortex, thus affecting the flow rate.
The tank is equipped with a stainless steel floating ball level indicator, which can show the capacity of the fire extinguishing agent in the tank through the level table on the instrument panel; the sewage outlet with ball valve at the bottom of the tank has two 76mm overflow pipes and two 76mm injection ports on each side of the car to facilitate water supply and liquid for other vehicles.
set up Preparation: 2 population holes, with quick locking and opening device.
2 liquid level indicators.
2 sewage outlets, with stainless steel ball valve.
4 water injection outlets (left and right)
Process: conduct firm and reliable welding, remove defects such as slag clamp and deficiency welding; conduct 24-hour hydrostatic test after welding to ensure no leakage.
4. Fire pump and piping system
Fire pump: CB 20.10/40.80 medium and low pressure fire pump (Shanghai Rongshen) flow Quantity: 40 / 80L / s
press Force: 1.7MPa (2.0MPa-1.0MPa)
Installation type: rear vacuum pump: piston type;
Vacuum pump material: wear resistance, corrosion resistance to meet the sealing requirements;
Water diversion time is 80s, and the suction depth is 7m. Maximum vacuum degree: 85 kPa;
pipe system
Water suction line: the pump is equipped with Φ 150mm water inlet, which can absorb water from natural water source, liquid tank, fire reservoir, and can be added to connect the fire hydrant water supply, water suction pipe is placed on the roof.1 water inlet with Φ150mm butterfly valve for connection to the water tank.
Water outlet road:
The roof is equipped with a Φ100mm water outlet fire gun pipeline and control valve, using a flexible joint;
1 Φ80mm and 1 Φ65mm manual ball valve controlled outlet are provided on the left and right sides of the pump room. Water injection pipeline: 1 Φ65mm pump water injection pipeline and control valve into the tank;
There is 1 Φ 80mm water injection port on the left and right sides of the front of the car, and 2 Φ 80mm water injection ports on the left and right sides of the car, which can be injected into the tank. The interface is internal buckle interface, with Φ 80mm to Φ 65mm and conversion joint.
Waste water pipe: in order to protect the water pump and each ball valve, the waste water pipe is installed in the pipeline, and respectively
Equipped with ball valve.
Cooling water pipeline: in order to make the force collector cope with various complex situations, it is equipped with a cooling water pipeline and control valve connected with the inlet and outlet water pipe.
5. Remote control fire gun
mould No.: Type P LKD 8 / 80 fire gun (West) flow Quantity: 80 (1 / s)
shoot Cheng: The water is 70m Foam at 65m pressure Force: 1.0MPa
Position Set: on top of the water tank.
accuse System: using remote control control, convenient operation.
Six, force collector
mould Formula: full power sandwich force collector cooling mode: forced water cooling
Lubrication mode: splash-type oil lubrication
Operation mode: the force collector is operated at the instrument panel in the cab, which is convenient and smooth.peaceful Installation: the force collector matches well with the engine, it is accurately installed, and there is no self-shedding phenomenon after the combination.
Seven, pump room
Main material:
The skeleton and skin are high quality carbon steel; the interior panel is oxidized aluminum plate.fundamental structure:
1, for the overall structure, the front for the water tank, the back for the pump room.
2. The rear is the pump room, equipped with instrument panel and operating system, and the pump room is equipped with locked shutter door. Frame solds the structure and ensures its strength and stiffness.
3. The pump room is equipped with lighting lights to meet the lighting needs of fire fighting at night. Aluminum alloy rolling shutter door:
1, the pump room with lock rolling shutter door, handle and lock pin durable, no deformation, sealing performance after water shower experiment, to ensure that no leakage phenomenon.
1:What payment methods do you support? - We support T/T and LC and other ways you need.
2:What is your minimum order quantity? - One unit.
3. How about the delivery time? - Generally it will takes 10 to 30 days after receiving your deposit. The sactual date will be depended on your order and item. We will contact you if we confirm the delivery date. And we will track the goods all the time until the goods reach to the destination.
4.How can I confirm whether your products will meet my needs? -You can tell us your needs such as size, material, volume, height and other information, our professional sales will provide solutions.
5. How do you pack the products? - Standard shipping packaging.
6. How about the price? - To provide the top quality product with competitive price is our mission all the time. We want a long-term business relatonship with our customers rather than cooperate for once.
7. How can I trust you? - We have 15 years of experience in the trailer manufacturing field; and we have our own factory. - We have supplied for many famous company at home and abroad; - We want to provide great service for you rather than just provide a price and product for you; - To meet you is the first step, then we would like to make friends and maintain the business relationship with you all the time.
Audited Supplier 
){kind=link}