Dongfeng Second-Hand 6-25 Cubic Rear-Mounted Compression Garbage Truck

• Customization: Available
• After-sales Service: Complete Vehicle
• Warranty: a Years
• Model NO.: CLW56678TYDF5
• Certification: ISO9000
• Volume: 6001-10000L
• Emission Standard: Euro 4
• Transmission Type: Automatic
• Payload: 20T
• Fuel: Diesel
• Drive Wheel: 4×2
• Brand: Dongfeng
• Models: Small
• Usage: Dump
• Condition: New
• Transport Package: Complete Vehicle
• Specification: 15 square
• Trademark: CLW
• Origin: China
• HS Code: 4801000000
• Production Capacity: 1000

Product Description

Easterly wind18Square compressed garbage truckParameter
Introduction of the car model
The compressed garbage truck is composed of a sealed garbage box, a hydraulic system and an operating system. The whole vehicle is fully sealed. The sewage in the process of self-compression, self-dumping and compression all enters the sewage compartment, which completely solves the problem of garbage transportation.Secondary pollutionThe problem avoids inconvenience to people. The key parts are imported parts, which have the advantages of high pressure, good sealing, convenient operation, safety and so on. It can be optionally equipped with a variety of rear-hanging bucket flipping mechanisms or garbage bucket flipping mechanisms.

.[Main Technical Parameters]
Product name	Compressed garbage truck
Total mass (Kg)	18,000	Box volume (m3)	18
Rated Load Mass (Kg)	6370,6305,5270,5205	Dimensions (mm)	7790, 8600X2550X3100
Prepared mass (Kg)	11500,12600	The number of passengers in the cab (persons)	2,3
The number of passengers in the cab (persons)	2,3	Load mass utilization coefficient
Approach angle/departure angle (°)	19/9,19/10,11/19/12	Front suspension/rear suspension (mm)	1260/2540, 1260/2580, 1260/2790, 1260/2950
Number of axes	2	Wheelbase (mm)	5300
Shaft load (Kg)	6,500/11500.	Maximum speed (Km/h)	105,89
[Technical parameters of chassis]
Chassis model	EQ1185LJ9CDE.	Name of the chassis	Cargo vehicle chassis (Class II)
Trademark name	Dongfeng brand	Manufacturing enterprise	Dongfeng Automobile Co., Ltd.
Dimensions (mm)	.70205950×2380×2845,3225	Number of tires	6
Approach angle/departure angle (°)	13/19, 17/19	Tire specifications	295/80R22.5 18PR,10.00R20
The number of steel plate springs	8/10+7.8/-	Front wheelbase (mm)	1862, 1933, 1949
Types of fuel	Diesel oil	.Rear wheelbase (mm)	1806,1865
Emission standards	GB17691-2018 Country VI
Engine model	Engine manufacturers	Discharge (ml)	Power (Kw)
B6.2NS6B230.	Dongfeng Cummins Engine Co., Ltd.	6200	169

Chassis configuration:
Dongfeng Series 18.The compressed garbage truck adopts the special chassis of Dongfeng D9 sanitation truck, 5300MM wheelbase, Cummins 230 horsepower engine,Faster 8-speed gearbox, 10.00 steel wire tires, 2500 mmDouble-layer beam, front bridge 4.5 T,Rear bridge 10 T, exhaust brake, air cut-off brake, original factory power take-off, original factory air conditioner, national joint warranty.
Top-loading configuration table:

Order	.Name	Specifications and models
1	Chassis name/model	Dongfeng D9 series
2	Wheelbase (mm)	5300
Three	The volume of the box is m3	18(Ensure that the standard 240L trash can can be loaded360 to 380Barrel)
4	Box thickness mm	.Wugang Q345 low-alloy manganese steel (side five and bottom five) flipping mechanism scraper, arc bottom plate, slide adopts Q710 high-strength plate
5	Sewage tank	There is a sewage sink on the front of the large box, and an integrated sewage tank at the bottom of the filler.
6	Box shape	Arc, the side plate is the whole plate for one-time molding, no welding
7	Hydraulic cylinder	Hengli
8	Oil pump	Changyuan
9	.Multi-way valve	Yangzhou Jiangyan 3+2 multi-way valve
Ten	Hydraulic oil pipe	Bonway hydraulic oil pipe
11	System rated pressure	18 MPa
12	Compression ratio	≥0.85
13	Consolidation method	Two-way peristaltic compression
14	Control system	German Siemens PLC and German photoelectric sensors
15	Loading single cycle time	≤24 s
16	Time to dump garbage	≤35 s
17	Control method	All-in-one independent operation of the handsplet (standard remote control)
18	Key component structure	Reinforced with cast steel parts
19	Shovel and skateboard slider	Highly wear-resistant nylon
20	.The design of the whole vehicle	Use SW three-dimensional software to simulate
21	Back-hanging bucket method	Standard configuration: rear-turning barrel type (can hang the national standard 240 plastic barrel or iron barrel or triangle bucket) / optional: fully sealed bucket, swing arm flip
22	Body color/text	Body color and text painting can be customized according to customer requirements.
22	Attachment	Profile light, side light, work light

Highlights of the car model
1	Larger loading capacity:	Compared with the previous generation, the load capacity of the same volume is increased by 5% per square (more than 7 barrels of 240L trash cans).
2	Easy fault position:	The force position of the scraper skateboard is generally prone to deformation, resulting in unstable work. The new generation of products developed by our company has been innovative in terms of materials and design, making the performance of the whole vehicle more stable and improving the service life.
Three	Working hours:	The loading time of the new generation of compressed garbage trucks produced by our company is within 25 seconds in the idle state, and the loading time is the longest time used by the vehicle, so it is fuel economy, reduces costs, and improves work efficiency.
4	Wear parts:	The scraper is the largest force on the vehicle, and the slide is the most worn. Our company's slide adopts a high-strength Q710 of more than 8mm, and the middle of the scraper is strengthened separately, which has greater bearing capacity and stronger wear resistance, which greatly increases the service life.
5	Oil pump:	The oil pump is the main component of the compression vehicle. Our company's new generation of oil pumps is customized for a military oil pump factory, with stable performance and extremely low failure rate.
6	Noise:	The new generation of compressed vehicles has added a photoelectric induction device, which can control the travel distance of each action, reduce the metal sound generated during collision and scraping, and effectively improve noise pollution.