49-55 square aluminum alloy semi-trailer oil tanker: Due to the lighter weight of aluminum alloy oil tankers compared to carbon steel tankers, it reduces fuel consumption and tire wear during transportation, thereby reducing daily operating and maintenance costs. Research shows that about 60% of the fuel used in cars is consumed by their own weight, and for every 1 ton reduction in curb weight, about 6 liters of fuel can be saved per 100 kilometers. Aluminum alloy oil tanker trucks adopt safe, lightweight, and intelligent design, mainly used for the transportation of finished oil products. Its design has the following four major characteristics:
1, Low center of gravity design, using a square cross-section, with the center of gravity lowered by 100mm for the same cross-sectional area, and the roll angle increased to 30 degrees and 23 degrees (standard value), effectively preventing rollover.
2, By adopting an anti rollover safety and stability system, the driving condition of the vehicle can be monitored in real time. When the system detects that the vehicle is about to lose control, it will apply braking force to specific wheels and reduce the speed, helping the vehicle to safely travel on the correct trajectory and prevent loss of control or rollover.
3, The structure design for preventing oil leakage in rear end collisions is extended by 500mm in the rear suspension design. At the same time, the tank body is made of high elongation American aluminum sheet (with an elongation rate only twice that of ordinary 5083 sheet metal), which solves the problem of cracking in the tank body during rear end collisions of ordinary tank trucks in China.
4, A domestic visual measurement system that monitors the volume of oil tankers in real-time through GPS, preventing theft of oil. When loading and unloading oil, the fuel volume of the tanker truck is intuitively visible to the user, and this system belongs to China.
From the above analysis, it can be concluded that using aluminum alloy oil tank trucks can not only recover investment costs in a short period of time, but also create more economic income and comprehensive benefits than carbon steel tank trucks. It is indeed an excellent choice for finished oil transportation equipment.
Installation configuration of 50 square aluminum alloy semi-trailer oil tanker:
This aluminum alloy oil semi-trailer is a 3-axle single tire straight tank, with a straight oval tank body, welded to the frame, and suspended by steel plate suspension. The material of the tank body is aluminum alloy 5083H111, the material of the frame is aluminum profile 6005, the overall dimensions of the vehicle are 12800X2500X3800MM, the wheelbase is 7000+1360+1360MM, the declared size of the tank body is 12300X2495X2070MM, the declared volume is 49.5 cubic meters, the actual volume is 50 cubic meters, the total mass is 40 tons, the rated load capacity is 33.01 tons, the curb weight is 6.99 tons, and it is equipped with 6 425/65R22.5 20PR dual tires. Equipped with Fuhua axles and widened brake pads. The top of the tank is equipped with 2 domestically produced European standard manhole covers, a domestically produced oil and gas recovery system with lower loading, a domestically produced aluminum alloy subsea valve, a Komi brand ABS announcement, and a gasoline announcement medium.
Product Name: Aluminum Alloy Oil Transport Semi trailer Product Model: CLW9403GYYLD Aluminum Alloy Oil Transport Semi trailer
Total weight (Kg) 40000 Tank volume (m3) 49.5
Rated load capacity (Kg) 33010 Dimensions (mm) 12800 × 2500 × 3800
Curb weight (Kg) 6990 cargo compartment size (mm) XXX
Rated passenger capacity (person), total mass of quasi trailer (Kg)
Driver's cabin capacity utilization coefficient
Approach angle/departure angle (°) -/18 Front suspension/Rear suspension (mm) -/1500
Number of axles 3 wheelbase (mm) 7000+1360+1360
Axle load (Kg) -/24000 (with three axles installed) Maximum speed (Km/h)
Other notes: 1. Transport medium: gasoline, density 700 kg/m3; Hazardous chemical category number: 3; Effective volume of tank: 49.5 cubic meters, external dimensions of tank (mm): length x long axis x short axis: 12300 x 2495 x 2070; 2. All protective materials are made of aluminum alloy and bolted together; The cross-sectional size of the rear protection (width × height) (mm) is 50 × 120, with a ground clearance of 500mm. 3. The car is equipped with an optional steel plate spring suspension; ABS manufacturer: WABCO Automotive Control Systems (China) Co., Ltd., model: 4005000810 4S2M; Adopt a tractor suitable for towing semi trailers for transporting dangerous goods.
Chassis Technical Parameters
Chassis model Chassis name
Trademark Name Production Enterprise
Dimensions (mm) 12800 × 2500 × 3800 Number of tires 6
Approach angle/departure angle (°) -/18 Tire size 425/65R22.5 20PR
Number of steel plate springs -/-/-/- Front wheelbase (mm)-
Fuel type Rear wheelbase (mm) 2040/2040/2040
Emission standards
Engine model Engine manufacturer Displacement (ml) Power (Kw)
Audited Supplier 
){kind=link}