Vehicle model: CL5181GYYD6
The configuration of Dongfeng Guoliu Tianjin carbon steel oil tanker is shown in the following picture:
Total weight: 18 tons, with a running weight of 10 tons and an empty weight of 7.8 tons
The announced volume is 12.6 cubic meters, but the actual volume is 13 cubic meters
1. Chassis configuration: Adopting the national VI Dongfeng Tianjin D530 semi standard roof, Cummins B62NS6B210 national VI engine, East 8JS85TE-C gearbox, 4700mm wheelbase, main beam: 250x80x7+4, front and rear axles: 4.5T/9T single reduction, aluminum 160L fuel tank, 275/70R22.5 18PR tires, electric glass, driving recorder, air suspension, front exhaust pipe front, front disc rear drum, ABS air brake cut-off, direction assist, clutch assist EBS (electric air brake system), FCWS/LDWS (front collision/lane departure warning), TPMS (front axle single tire pressure monitoring), with original factory air conditioning.
2. Upper configuration: Actual volume: 13 cubic meters, medium: diesel gasoline dual medium! Tank size: 5700 × 2000 × 1400MM Vehicle size: 8465 × 2500 × 3100 Single compartment with pump, can pump in and out! Complete set of bottom mounting (European standard tank mouth, submarine valve with automatic alarm device, bottom mounting oil port, oil and gas recovery, probe rod probe seat, electrostatic socket), two oil pipes, fireproof cap with cover, one toolbox, one dangerous goods sign light and two dangerous goods aluminum tags are included as standard equipment for the company, with accompanying tools and complete procedures for registration
| [Vehicle technical parameters] |
| Product trademark |
Cheng Li card |
Announcement batch |
379 |
| product name |
oil-can |
product model |
CL5181GYYD6 |
| gross mass (Kg) |
18000 |
Tank volume (m3) |
12.6 |
| Rated load mass (Kg) |
10065,10000 |
outline dimension (mm) |
8465×2500×3100 |
| curb weight (Kg) |
7805 |
Goods Chamber Size (mm) |
×× |
| Number of passengers (person) |
2,3 |
Maximum saddle load mass (Kg) |
|
| Approach angle / departure angle of (°) |
16/12 |
Front suspension / rear suspension (mm) |
1430/2335,1400/2365 |
| axle weight (Kg) |
6500/11500 |
Top vehicle speed (Km/h) |
80 |
| remarks |
EBS Model / Manufacturer: EBS 5 / East Branch Noel Commercial Vehicle Braking System (Shiyan) Co., Ltd.; VIE EBS / ESC- / Zhejiang Wanan Technology Co., Ltd. A speed limiting device is installed; speed limit (km/h): 80; driving recorder with satellite positioning function; engine net power value: B6.2NS6B210 (151), DDi50E190-60 (143); engine / fuel consumption value (L / 100km); B6.2NS6B210 (26.5), DDi50E190-60 (23.9). Protective material: Q235B, connection mode: left and right side protection and rear protection, the rear protection section size (mm): 14050, the rear protection height (mm): 490; the maximum density of quasi-transport medium: 830 kg / m 3. Total capacity of the tank: 12.6 cubic meters, effective volume of the tank: 12.04 cubic meters. Overall size of tank (long shaft short shaft (mm): 570020001400; dangerous goods transport vehicle type: FL type; |
| [Chassis technical parameters] |
| Chassis model |
DFH1180EX9 |
Chassis name |
truck chassis |
| brand name |
Dongfeng brand |
manufacturing enterprise |
Dongfeng Commercial Vehicle Co., Ltd |
| number of axles |
2 |
Number of tires |
6 |
| wheel base (mm) |
4700 |
| tyre size |
275/80R22.5 18PR |
| Number of steel plate spring sheets |
3/- |
front gauge (mm) |
1910,1840,1980 |
| Fuel types |
diesel oil |
rear track (mm) |
1840,1860,1800,1820 |
| Emission basis standard |
The GB17691-2018 countries |
| engine type |
Engine production enterprise |
displacement (ml) |
power (Kw) |
| B6.2NS6B210 |
Dongfeng Cummins Engines, Ltd |
6200 |
154 |
Precautions for refueling trucks:
(1) Check if the rear anti-static traction belt is on the ground and if all equipment is functioning properly.
(2) Insert the pole into the damp ground to prevent static electricity from catching fire.
(3) Check whether the clutch control handle, power take-off control handle, and control valve switch are in the correct position, whether the throttle is turned to the minimum, and whether the ball valve handles are in the correct position.
(4) Check the lubricating oil level in the pump gearbox. If it is insufficient, add gear oil.
(5) When there is no liquid in the oil pump, a guide fluid should be added to the pump body in advance. When using a new car for the first time, it is necessary to add a guide fluid to the pump to prevent damage to the pump body caused by dry running without liquid.
(6) Check whether the discharge pipeline, discharge valve, and conveying pipe are empty and clean, ensuring that all pipelines are suitable for loading and unloading medium items.
(7) If liquid needs to be extracted, the rotating equipment should be kept away from the oil tanker to prevent entanglement. When extracting liquid, the pump should be stopped promptly and the valve should be closed.
(8) In emergency situations, the emergency control valve should be promptly closed and cut off.
basic operation
1. Oil tankers should be equipped with dedicated fire extinguishers and installed with traction chains and power poles. When driving, the traction chain should make contact with the ground; When refueling or draining, the power pole must be inserted into damp ground.
2. The fuel tank filling hole should be tightly sealed, the oil drain valve and oil drain pipe should be leak free, the fuel tank vent hole should be unobstructed, the oil pump inlet filter screen should be cleaned regularly, and the oil hose should be immediately fitted with joint covers at both ends after use to prevent dirt from entering.
3. The carburetor and exhaust pipe of the internal combustion engine shall not have backfire phenomenon, and the exhaust pipe shall be installed in front of the vehicle.
4. Oil tanker operators are not allowed to wear shoes with nails, smoking near oil tanks is strictly prohibited, and ignition is strictly prohibited.
5. When parking, keep away from sources of fire, and choose a cool place to park during hot seasons. During thunderstorms, do not park under large trees or high-voltage lines. When stopping midway, there should be a dedicated person to supervise.
6. During the maintenance process, if the operator needs to enter the oil tank, it is strictly prohibited to carry fire and reliable safety protection measures must be taken. There must be a dedicated person outside the tank for supervision.
7. All electrical equipment in the car must be well insulated and sparks are strictly prohibited. The working lighting in the car should be safety lights below 36V.
8. When the sedimentation tank of the fuel tank freezes, it is strictly prohibited to use hot water or steam to bake, or drive the car into a warm room to thaw.
9. When performing maintenance and repairs under the vehicle, the internal combustion engine should be turned off, the handbrake should be tightened, and the wheels should be tightened.
10. When a vehicle needs to be inspected after repair, it should be driven by qualified personnel and no passengers or cargo are allowed on board. When road inspection is required, the inspection certificate issued by the traffic management department should be displayed.
11. When parking on a slope, use reverse gear for downhill parking and first gear for uphill parking, and plug the tires with triangular wedges.
FAQ
1.Q:Are you a factory or a trade company?
A: We are a leading manufacture of pressure vessels,bobtails,trailers, trucks, and skid mounted stations,and spare parts. Welcome to visit us in Suizhou city, the production base of Chinese special purpose vehicles.
2. Q: Where is your factory located?
A: We are located in Suizhou City,Hubei Province,China
3.Q:How can i visit there?
A:Welcome to the factory for inspection. You can fly to Wuhan Tianhe Airport, and our company will arrange a special car to pick you up.
4.Could you customize exactly according to my requirements?
A:Yes. We have professional R&D team, we can produce the product exactly according to your requirements.
5.Q: Do you provide certification that we need?
A:We can provide various certifications associate. Such as BV,DOT, ADR, SASO and so on.
6.Q: what's your payment terms?
A:T/T& L/C are preferred.
7.Q:Do you arrange shipment for the vehicles?
A:Yes,we can arrange shippment based on trade terms.
8. Q:What service can I get from you?
A:We provide lifelong tracking service and one year free warranty for all of our products. Meanwhile we provide free training and technical support to guide you repair your product. If need, we will also send original spare parts free of charge by air.
9.Q:How is the packing?
A:All the packing comply with exporting standard.
10.Q:How long is the lead time?
A:20-25 working days.
For other questiones,we will reply you ASAP after receiving your consult!
Purchase Guide
1 * * Please send us your inquiry;
2 * * We will reply to your quotation within 12 hours;
3 * * We will negotiate the configuration you require;
4 * * Confirm technical data → Sign contract (P/I) → 30% deposit (or issue letter of credit) → Production;
5 * * Manufacturing process update message → Production completed;
6 * * balance payment → factory delivery → shipment → customs clearance → A/S service for 1 year.
Service Commitment
1. 24-hour hotline is at your service and can provide quality and extended services.
2. We can provide lifelong free technical guidance services.
3. For customers who purchase bulk quantities for the first time, we can dispatch service technicians to provide on-site guidance services and short-term on-site services.
4. Free technical training can be provided to help customers quickly and correctly use and maintain trucks and trailers.
Our advantages
--What are our advantages?
**Competitive prices - We are a leading distributor for major truck, semi-trailer, and construction machinery manufacturers/factories in China, enjoying the best dealer prices every year. From comparison and customer feedback, our prices are more competitive than other manufacturers/factories.
**Quick response - Our team is composed of a group of diligent and enterprising people. Work 24/7 and respond to customer inquiries and questions at any time. Most problems can be solved within 12 hours.
**Fast delivery - Manufacturers/factories usually take over 30 days to produce the ordered machines, and we have various resources locally and nationally to receive the machines in a timely manner.
--What payment terms can we accept?
Usually we can use wire transfer or letter of credit for payment.
**When making wire transfer payments, a 30% down payment is required, and the remaining 70% should be settled before shipment or with a copy of the original bill of lading from an existing customer.
**When making payment through a letter of credit, a 100% irrevocable letter of credit with no "soft terms" is acceptable. Please consult with your personal sales manager who works with you--
How long is the validity period of our price?
We are a gentle and friendly supplier, never seeking excessive profits. Basically, our prices remain stable throughout the year, and we only adjust prices based on two situations:
**The exchange rate between the US dollar and the Chinese yuan varies greatly depending on international currency exchange rates.
**Due to rising labor and raw material costs, manufacturers/factories have adjusted truck and machinery prices--
What logistics methods can we use for transportation?
We can transport trucks, trailers, and machinery through various modes of transportation.
**90% of the goods will be shipped by sea to all major continents, such as South America, the Middle East, Africa, Oceania, and Europe, through container or roll on/roll off/bulk transportation.
**For China's neighboring countries such as Russia, Mongolia, Kazakhstan, Uzbekistan, etc., we can transport trucks, trailers, and machinery by road or rail.
**For urgently needed lightweight spare parts, we can ship them through international express delivery services. For example, DHL, UPS, TNT, or Fedex.
Audited Supplier 
Vehicle model: CL5181GYYD6
){kind=link}